Any pointers to sheetmetal shop in Pattaya who would be able to make a custom profile sheetmetal to put on top of my roof joint leak?

 

Would need to bend about 5m long profile to a custom shape (simple shape), however not possible without relevant profile making machinery.

 

Standard roof profiles won't work as a special case of an add-on roof slope that leaks at joint.

... Bump... Really nobody knows place that can bend some sheetmetal?

Not sure if they can do the length you mention but I had a piece of steel bent to specific size/angles and drilled as a bed frame support. They were located on Sukhumvit, I think from memory, just before or after Pattaya Tai going southbound - it was a long time ago. I stumbled on them after basically driving up and down Suk trying every place that looked like they could do it.

Another potential place is the well known stainless steel place on Suk going northbound on Suk in between the 2nd Road extension and the lights at Chaiapruek.

13 minutes ago, topt said:

Not sure if they can do the length you mention but I had a piece of steel bent to specific size/angles and drilled as a bed frame support. They were located on Sukhumvit, I think from memory, just before or after Pattaya Tai going southbound - it was a long time ago. I stumbled on them after basically driving up and down Suk trying every place that looked like they could do it.

Another potential place is the well known stainless steel place on Suk going northbound on Suk in between the 2nd Road extension and the lights at Chaiapruek.

thanks, need to drive around to have a look.

re length, if can not do so long, I think could be done in two sections

Not sure if they can do the length you mention but I had a piece of steel bent to specific size/angles and drilled as a bed frame support. They were located on Sukhumvit, I think from memory, just before or after Pattaya Tai going southbound - it was a long time ago. I stumbled on them after basically driving up and down Suk trying every place that looked like they could do it.
Another potential place is the well known stainless steel place on Suk going northbound on Suk in between the 2nd Road extension and the lights at Chaiapruek.

Went to have a look the shop near pattaya tai and yes they certainly have the tools and materials to do what I looking after... However today staff was only a toothless old man who miraculously got me to understand that tomorrow should have boss who has at least some English skills.

Thanks for the pointer.