Any 3BB Fiber Users Managed to Dump ISP Router, Not just Bridge Mode?

[observer90210]

NT may be ok if you read Thai. But for a majority, 3bb seems far more foreigner friendly with full english available on their website. Try to find a sigle english word on the NT broadband internet website.....if you do so, you are not on the correct website????

[Mutt Daeng]

  On 9/22/2023 at 2:56 PM, recom273 said:

It's a Huawei, EG8010H - We had some difficulties when moving in, 3BB didnt really know how to install it. The 3BB "tech" tried to tell me it wouldn't work because I was living in the village, I was too far away from the city, that there was a different protocol used in Issan than the south, etc and they bought 3 different types of ONT to try and solve the issue. So, if you cant get the one mentioned, they have alternatives. There is no config, they are already setup, it's just a basic terminal, one fibre port in - one ethernet port out.

Expand  

Thanks for the info. I was looking at the HG8030M on Lazada. Will look for the EG8010H now.

[Mutt Daeng]

  On 9/22/2023 at 3:12 PM, observer90210 said:

NT may be ok if you read Thai. But for a majority, 3bb seems far more foreigner friendly with full english available on their website. Try to find a sigle english word on the NT broadband internet website.....if you do so, you are not on the correct website????

Expand  

After reading this thread, I looked at the NT website and came to the same conclusion.

[recom273]

  On 9/22/2023 at 11:52 PM, Mutt Daeng said:

Thanks for the info. I was looking at the HG8030M on Lazada. Will look for the EG8010H now.

Expand  

I need to check the serial for you, maybe HG not EG - I was just working off images on internet and memory - Lazada have this -

 

https://s.lazada.co.th/s.Pc5Fl

 

but it’s really something for 3bb to supply you for free - I had enough problems with getting them to figure out how to configure their own kit in the first place, the solution was like another poster, have the correct VLAN to add to your PPoE credentials - they would probably walk away from a non-3bb ONU. 

[JBChiangRai]

  On 9/22/2023 at 11:58 AM, muratremix said:

This is incorrect. 3BB has it's own International Gateway and 3BB torrenting and downloading speed is pretty good. I'm getting 400-500 Mbit/s easily on a single torrent.

Expand  

Are you sure 3BB have their own gateway? I can't find it on the attached.  Instantaneous Speed for me is irrelevant, volume is important to me, I am getting 2.7TB/day consistently with CAT. My 2 servers are about 350 TB.

[Mutt Daeng]

  On 9/23/2023 at 12:29 AM, recom273 said:

I need to check the serial for you, maybe HG not EG - I was just working off images on internet and memory - Lazada have this -

 

https://s.lazada.co.th/s.Pc5Fl

 

but it’s really something for 3bb to supply you for free - I had enough problems with getting them to figure out how to configure their own kit in the first place, the solution was like another poster, have the correct VLAN to add to your PPoE credentials - they would probably walk away from a non-3bb ONU. 

Expand  

Thanks for the update. I've already bought the HG8310M (from the same vendor in your link above) to play with. 

[Mutt Daeng]

Success!

I have managed to remove the 3BB supplied HG8145V routing-type Optical Network Terminal (which I previously set to bridge mode, so I can use my ASUS RT-AC86U instead) from my 3BB fibre setup and replace it with a HG8310M ONT that I bought off Lazada for 300 baht. Here's a pic of my setup. I've left the HG8145V in the picture so you can see the difference in the size of the devices. I'm keeping it there as a standby for a couple of days so I can easily revert to the old setup, should anything untoward happen.

 

Replacing the 3BB Huawei HG8145V Router with a Huawei HG8310M Bridging ONT.pdfFetching info...

[wozzlegummich]

Did anyone get the UFiber NanoG working with 3BB Fibre? I would love to stick to all Ubiquiti Unifi stuff.

[recom273]

  On 1/28/2024 at 10:08 AM, wozzlegummich said:

Did anyone get the UFiber NanoG working with 3BB Fibre? I would love to stick to all Ubiquiti Unifi stuff.

Expand  

 

You can contact Ubiquity Thailand 02 114 7275 to check if it's possible. I haven't seen them for sale here, have you?

 

I don't actually see much benefit  - they aren't unifi, so im guessing the don't appear on the conroller dashboard. I can monitor my 3BB ONT (same model as @Mutt Daeng details above, on my own home dashboard.

 

[TallGuyJohninBKK]

  On 9/26/2023 at 4:51 AM, Mutt Daeng said:

Success!

I have managed to remove the 3BB supplied HG8145V routing-type Optical Network Terminal (which I previously set to bridge mode, so I can use my ASUS RT-AC86U instead) from my 3BB fibre setup and replace it with a HG8310M ONT that I bought off Lazada for 300 baht. Here's a pic of my setup. I've left the HG8145V in the picture so you can see the difference in the size of the devices. I'm keeping it there as a standby for a couple of days so I can easily revert to the old setup, should anything untoward happen.

 

Replacing the 3BB Huawei HG8145V Router with a Huawei HG8310M Bridging ONT.pdf 264.29 kB · 9 downloads

Expand  

 

1. MD, any update on how your alternate setup above is or isn't working since your prior post on this?

 

2. Anyone else with a 3BB fiber setup manage to replicate MD's experience with this?

 

 

 

[recom273]

  On 1/29/2024 at 6:00 AM, TallGuyJohninBKK said:

 

1. MD, any update on how your alternate setup above is or isn't working since your prior post on this?

 

2. Anyone else with a 3BB fiber setup manage to replicate MD's experience with this?

 

 

 

Expand  

 

Yes, I have a 3BB supplied GPON ONT running for many years, the Huawei model numbers seem to be different, but they still do the same thing, maybe the same inner workings.

 

@Mutt Daeng Is your setup still functioning? 

[Mutt Daeng]

  On 1/29/2024 at 10:12 AM, recom273 said:

  On 1/29/2024 at 6:00 AM, TallGuyJohninBKK said:

 

1. MD, any update on how your alternate setup above is or isn't working since your prior post on this?

 

2. Anyone else with a 3BB fiber setup manage to replicate MD's experience with this?

 

 

 

Expand   Expand  

 

Yes, I have a 3BB supplied GPON ONT running for many years, the Huawei model numbers seem to be different, but they still do the same thing, maybe the same inner workings.

 

@Mutt Daeng Is your setup still functioning? 

Expand  

@TallGuyJohninBKK, @recom273 yes, my setup is still working fine. Not had any problems whatsoever.

Although the upload speed seems low (I am on 1Gb/1Gb package)

 

[RedCardinal]

  On 1/29/2024 at 3:07 AM, recom273 said:

 

You can contact Ubiquity Thailand 02 114 7275 to check if it's possible. I haven't seen them for sale here, have you?

 

I don't actually see much benefit  - they aren't unifi, so im guessing the don't appear on the conroller dashboard. I can monitor my 3BB ONT (same model as @Mutt Daeng details above, on my own home dashboard.

 

Expand  

Is this visible in Unifi Controller?

[recom273]

  On 2/12/2024 at 7:21 AM, RedCardinal said:

Is this visible in Unifi Controller?

Expand  

No - this is an app on a home server pinging a server in BKK and graphs the results.

 

There is a widget for controller but just limited to uptime and connected users - https://gethomepage.dev/latest/widgets/services/unifi-controller/ 

[KannikaP]

  On 1/30/2024 at 1:40 AM, Mutt Daeng said:

@TallGuyJohninBKK, @recom273 yes, my setup is still working fine. Not had any problems whatsoever.

Although the upload speed seems low (I am on 1Gb/1Gb package)

 

Expand  

I get the same results on Speedtest, using the router supplied by 3BB, 1GB/500.

Why need I change please?

[Mutt Daeng]

  On 2/13/2024 at 5:52 AM, KannikaP said:

I get the same results on Speedtest, using the router supplied by 3BB, 1GB/500.

Why need I change please?

Expand  

Not sure what you are asking. Nobody has said anyone "needs" to change anything.

[wozzlegummich]

Ubiquiti now have UF-Instant SFP ONU but unfortunately only works if the ISP is running Ubiquiti. But for UF-Nano (UFiber Nano G) and UF-LOCO (UFiber Loco) these support the following OLT's at the ISP end.
Huawei MA5608T (firmware version: MA5600V800R013C10)
Huawei MA5683T (firmware version: MA5600V800R015C00 / patch: SPC101)
Huawei MA5800-X15
Huawei MA5800-X7
FiberHome AN5516-04 (firmware version: VR3.2)
ZTE ZXA10 (firmware version: GTGOG V1.2.5P3)

Does anyone know what OLT Equipment 3BB are using?

[wozzlegummich]

Seems the UF-Instant can be modded and used with 3rd prty ISP equipemnt

https://github.com/stich86/UF-Instant-Mod