THAIPHUKET Posted July 17, 2022 Share Posted July 17, 2022 House and pipes are 30y old. Worried that the new pump could be too strong and blow up the pipes. Upstairs only 2 bathrooms. How strong should the pump be? Any suggestion for a service? Link to comment Share on other sites More sharing options...
Bill97 Posted July 17, 2022 Share Posted July 17, 2022 Yeh that is a concern. I see pipes blowing up in houses several times a week on my routine drives. 1 Link to comment Share on other sites More sharing options...
Dante99 Posted July 18, 2022 Share Posted July 18, 2022 16 hours ago, THAIPHUKET said: How strong should the pump be? The question really is what pressure should you operate at. Some pumps include pressure tanks and are factory set for on/off pressures, generally not to be changed, other systems have an external pressure tank and an adjustable pressure regulator. What pressure will cause your pipes to leak? No one can know for sure. If you have an adjustable pressure regulator then you set it high enough to get adequate upstairs bathroom water pressure but not more than that because more will risk pipe leakage. Link to comment Share on other sites More sharing options...
KhunLA Posted July 18, 2022 Share Posted July 18, 2022 If a standard water pump is going to break your pipe conx, or the pipe itself, then it's time to replace anyway, before one does break. Link to comment Share on other sites More sharing options...
Dante99 Posted July 21, 2022 Share Posted July 21, 2022 On 7/18/2022 at 9:00 AM, KhunLA said: If a standard water pump is going to break your pipe conx, or the pipe itself, How can you tell if that is going to happen? Like how can you know if a conx or pipe is going to break? Link to comment Share on other sites More sharing options...
KhunLA Posted July 21, 2022 Share Posted July 21, 2022 4 minutes ago, Dante99 said: How can you tell if that is going to happen? Like how can you know if a conx or pipe is going to break? What kind of construction is it, and what pressure do you have now ? Is it city fed, and simply decreased because of more houses on the line, or was never very good. Construction wise, are the pipes 'in' the wall, or do you have a wet wall, or outside lines with easy access. Any visible leaks now ? PVC ? Source of the water, well, tank, or going to put city water in tank and draw from that? How far you drawing from, and pushing to ? You really don't need much power if not drawing from or going to, that far. 1 1 Link to comment Share on other sites More sharing options...
Dante99 Posted July 21, 2022 Share Posted July 21, 2022 50 minutes ago, KhunLA said: What kind of construction is it, and what pressure do you have now ? Is it city fed, and simply decreased because of more houses on the line, or was never very good. Construction wise, are the pipes 'in' the wall, or do you have a wet wall, or outside lines with easy access. Any visible leaks now ? PVC ? Source of the water, well, tank, or going to put city water in tank and draw from that? How far you drawing from, and pushing to ? You really don't need much power if not drawing from or going to, that far. What a thorough effort at distraction while totally avoiding any attempt to answer the question. Quite impressive. Link to comment Share on other sites More sharing options...
KhunLA Posted July 21, 2022 Share Posted July 21, 2022 49 minutes ago, Dante99 said: What a thorough effort at distraction while totally avoiding any attempt to answer the question. Quite impressive. Thank you, but can't answer the question without the information. What I would do, since questioning the pipe age & longevity, and if staying there for a while, is simply replace them all. ALTHOUGH, if 'in' the wall, that could be problematic. And your advice, was just as useless as me, asking for more info, abet after, could offer a suggestion. Link to comment Share on other sites More sharing options...
VocalNeal Posted July 21, 2022 Share Posted July 21, 2022 Most domestic pumps put out about the same pressure they operate at 3 bar with a max of 4. Blue plastic pipe is rated for about 10-13 bar. If it hasn't been in the sun for 5 years the plastic pipe is probably as good as new. I would not worry about installing a pump. 1 Link to comment Share on other sites More sharing options...
transam Posted July 21, 2022 Share Posted July 21, 2022 Plastic pipes they use here are OK if not been in direct sunlight, as long as the fitter used a sensible amount of the glue stuff. The electric pumps do seem to have a lot more pressure than paid for water supply, but I have never had a problem with the pipes via the pump. I have a 2 story house, which is now 15 years old, I used a 250 watt pump first, lasted 11 years, I now have a Mitsubishi 255 watt with no pressure tank ,that sits beside a 1000 litre feed tank, nice powerful showers upstairs. ???? Link to comment Share on other sites More sharing options...
seedy Posted July 21, 2022 Share Posted July 21, 2022 We use a Mitsu WP-255Q5 - almost identical Never a problem Link to comment Share on other sites More sharing options...
THAIPHUKET Posted July 23, 2022 Author Share Posted July 23, 2022 Thanks to all and sorry for not answering your very justified questions. Age of the rented house: over 30y, plumbing: old metal pipes, condition unknown, No problems in the last 15 years. That's all the landlord and we do know. Overall impression: good old fashion building quality. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now