Wrought Iron Gates

[pontious]

We want to install wrought iron gates on our property.

We have been quoted Bht 7000 ish per square metre ( for imported metal not thai)-cheaper for thai

Anyone purchased them for a comparison?

P

[plasticpig]

Can you tell me why you are prepared to pay a premium

for Stainlees or mild steel from out side of Thailand?

I’m sure Thailand has plants providing high quality

SS and MS. (anyone know)

Sounds a bit of a sales ploy.

Only asking, it’s not a criticism.

sorry can't help you with the cost per, m

[pontious]

Can you tell me why you are prepared to pay a premium

for Stainlees or mild steel from out side of Thailand?

I'm sure Thailand has plants providing high quality

SS and MS. (anyone know)

Sounds a bit of a sales ploy.

Only asking, it's not a criticism.

sorry can't help you with the cost per, m

Thanks for your reply.

We assumed it would be Thai- we were advised 'quality, quality,quality. ( imported from Italy)

We have a 10 x 2 metre gate requirement so Baht 70000+ seems very high to me.

I will see if anyone on the forum has purchased any and investigate 'Thai prices.

Thanks

P

[onzestan]

We have a 10 x 2 metre gate requirement so Baht 70000+ seems very high to me.

Way to expensive.

Shop around should be a lot cheaper.

Plenty of small businesses auround especially east pattaya.

cheers

onzestan

[plasticpig]

Try this place, got it off the webb, don't know if good or bad.

webb site looks good

Asia face.

First Eastern Supply Co., Ltd.

1/3 Moo 6, Pattaya City

T. Naklua, A.Banglamung

Chonburi, Thailand

20150

Phone: 66-38-370-396, 66-38-422-815

Fax: 66-38-423-537

[loong]

I can't tell you about local prices, but a while back I had a 4metre x 2 sliding gate fitted, cost 11,000 Bt including concrete base and pillars. That was in Phrae and not imported metal. They use solid metal though. I took the lowest quote after inspecting some of the man's previous work. The highest quote I had was 30,000 Bt.

was pleased with the gate but not impressed with the concrete work.

I would definitely shop around as it seems to me that you have been quoted a ridiculously high price

[pontious]

I can't tell you about local prices, but a while back I had a 4metre x 2 sliding gate fitted, cost 11,000 Bt including concrete base and pillars. That was in Phrae and not imported metal. They use solid metal though. I took the lowest quote after inspecting some of the man's previous work. The highest quote I had was 30,000 Bt.

was pleased with the gate but not impressed with the concrete work.

I would definitely shop around as it seems to me that you have been quoted a ridiculously high price

Thanks you all for your advice

I did of course mean a gate of 5mx2m =70000 (not 10x2) My house is not that big!

P

[243756_1469957942]

my iron gate is starting to peel. crack with some filler that is in the main joints;  painting of coarse but what material is used  as main frame sealer ? 

i know very expensive to replace. 

[243756_1469957942]

On 10/18/2007 at 4:34 PM, pontious said:

Thanks you all for your advice

I did of course mean a gate of 5mx2m =70000 (not 10x2) My house is not that big!

P

wish my gate was that cheap !   i got quoted   300k thb. about same size.  heavy decor. Now trying to reseal the seams with whatever meterial is used at the main bar joints.  Then after; painting. 

[Rimmer]

This topic is 15 years old suggest start a new one in the DIY forum

 

//CLOSED//