barefoot1988 Posted July 21, 2012 Share Posted July 21, 2012 any recommendation for bike mechanics for 2 strokers? honest, reasonable charge. hopefully i could get back within a week or so im looking to do up my tzm150. the engine is seize, need towing service as well. just need a fresh new piston and rings, and preferably a sleeve as well. might just do up the carb as well. its a bonus if some basic english is spoken but not a must. mods, would you mind keeping this thread under cm forum? i had one current thread in the bikewith little respond over there Link to comment Share on other sites More sharing options...
cmbe Posted July 21, 2012 Share Posted July 21, 2012 On Mahidol road before Robinson airport (pass the corner of Suan Prung hospital and go direction to Robinson airport after pass a few orange stall shops you will see a motorbike repair shop on the left side). Another one is on Chang Phuak road before Kuangsing intersection on the right side, the name is Yong Yut motor. Link to comment Share on other sites More sharing options...
naboo Posted July 21, 2012 Share Posted July 21, 2012 On the road to Doi Saket, pass the 121 intersection, after 1km on the left is a PTT station. Directly opposite is Rung Rueng, they specialise in modifying bikes for off road use, but are better than most at anything. Link to comment Share on other sites More sharing options...
No1 Posted July 23, 2012 Share Posted July 23, 2012 (edited) Definitely the best, maybe the most expensive is Joe. He is a German mechanic and usually screws around with bigger bikes, Harleys and BMWs. Find him here http://goo.gl/maps/mj7o, Chiang Moi Rd, Soi 2. Edited July 23, 2012 by No1 Link to comment Share on other sites More sharing options...
naboo Posted November 19, 2012 Share Posted November 19, 2012 On the road to Doi Saket, pass the 121 intersection, after 1km on the left is a PTT station. Directly opposite is Rung Rueng, they specialise in modifying bikes for off road use, but are better than most at anything. Had enough of this place. Anyone got a recommendation for a mechanic who can do a good job on 250cc bikes. Not a main dealer (got nothing against them, just need something else)? Link to comment Share on other sites More sharing options...
sticklee Posted November 19, 2012 Share Posted November 19, 2012 On Canal Rd. just south of Mae Hia market, next door to the big Bridgestone Tire shop. A-Bike is the name, A is the owner. He speaks pretty good English and works on small as well as big bikes. I've been going to him for a couple of years and have seen other foreigners there. He rebuilt my Nouvo engine for 5000B. Has always treated me very fairly. 1 Link to comment Share on other sites More sharing options...
sticklee Posted November 19, 2012 Share Posted November 19, 2012 Fuzzy memory on the above.,... I also had had the transmission previuously overhauled. It was about 5K in total that I spent Link to comment Share on other sites More sharing options...
CBR250 Posted November 20, 2012 Share Posted November 20, 2012 My favourite mechanic for any bike is Khun Neung on the Hang Dong Road just past the Big C on other side of Hang Dong - on the way to San Patong. He looks after my CB 400, and a few other big bikes as well as anything on 2 wheels. He is honest, excellent quality, good English. He does pick ups (picked me up from near Pai when my generator packed in). He still uses his first ever bike - 20 year old 2 stroke. Also has a flying Suzuki 150 2 stroke that is ancient but pristine. And about 10 trial bikes that he maintains for Northern Trials club - he was Thailand Trials champ for 3 years running. He re-builds bikes from frame out, and does good deals and good work. He is a carburetor genius too. Best go and see him and decide what you think. Phone him on 081-724-7172. 2 Link to comment Share on other sites More sharing options...
naboo Posted November 20, 2012 Share Posted November 20, 2012 Thanks CBR250, will check him out once I get my bike back from where it is now. No doubt they won't have fixed the problem/caused another. Link to comment Share on other sites More sharing options...
bikerjoy Posted November 21, 2012 Share Posted November 21, 2012 best shop is; PISTON SHOP, Khun Nat. Speaks excellent English, has the cleanest workshop and takes care of my 20 yr. old Africa Twin very well. phone053 234344 on the busy road between tesco lotus/superhighway and moat. 1 Link to comment Share on other sites More sharing options...
Rancid Posted November 21, 2012 Share Posted November 21, 2012 Definitely the best, maybe the most expensive is Joe. He is a German mechanic and usually screws around with bigger bikes, Harleys and BMWs. Find him here http://goo.gl/maps/mj7o, Chiang Moi Rd, Soi 2. Many speak highly of Joe, however try and get your bike in there, he always says too busy, I was told to check back the following year though he seems to take in old customers. Ray Shop is a very good Thai mechanic, go away from the moat up Chang Puak, turn L at the bus station intersection, then R at first small intersection, he is down the road a little on the L. He speaks some English and can fix anything plus the charges are reasonable. Last I saw he was restoring some 1906 English engine, plus does lots of old BMW, chopper etc restores. Can't find a part, he will. 1 Link to comment Share on other sites More sharing options...
8milesfromhome Posted June 1, 2013 Share Posted June 1, 2013 My favourite mechanic for any bike is Khun Neung on the Hang Dong Road just past the Big C on other side of Hang Dong - on the way to San Patong. He looks after my CB 400, and a few other big bikes as well as anything on 2 wheels. He is honest, excellent quality, good English. He does pick ups (picked me up from near Pai when my generator packed in). He still uses his first ever bike - 20 year old 2 stroke. Also has a flying Suzuki 150 2 stroke that is ancient but pristine. And about 10 trial bikes that he maintains for Northern Trials club - he was Thailand Trials champ for 3 years running. He re-builds bikes from frame out, and does good deals and good work. He is a carburetor genius too. Best go and see him and decide what you think. Phone him on 081-724-7172. Hi CBR250, I tried to find this mechanic today but had no luck. Is Khun Neung close to the Big C past Hang Dong? Or is his shop much further down. Also is the shop actually on the roadside of the hwy 108, any signs on the shop or landmarks? I might try to locate him on google street view before i try to find him again. Any extra info you could give would be great! Thanks in advance. Link to comment Share on other sites More sharing options...
barefoot1988 Posted June 1, 2013 Author Share Posted June 1, 2013 ah, my older thread. just some updates i ended up doing my top overhaul in one of the local bike shop around tanin market area. it was 3000 + baht inclusive of labor, bloody cheap for a piston replacement. before that, i was looking for afew bigger reputable shop but most of them seems to incline more towards bigger and modern bikes eventually i faced a carb problem and got it fixed at one of the recommended bike shop mentioned above, Ray bike shop. He is a very good and honest mechanic, i had been there at least 4 times and every single thing im there, he would be fixing up some bigger choppers and some really rare bikes around here. he must be highly recommended among the local vintage big bikes forum, i always seem him doing work on boxer engines. suspect the r75. he is really just the man to look for, for complete overhaul for bigger older rare bikes. just a note, his shop isn't as clean as some of the sparkling pretentious bigger bike workshops 1 Link to comment Share on other sites More sharing options...
CBR250 Posted June 2, 2013 Share Posted June 2, 2013 Phone him on 081-724-7172. Hi CBR250, I tried to find this mechanic today but had no luck. Is Khun Neung close to the Big C past Hang Dong? Or is his shop much further down. Also is the shop actually on the roadside of the hwy 108, any signs on the shop or landmarks? I might try to locate him on google street view before i try to find him again. Any extra info you could give would be great! Thanks in advance. Sorry - been a while since I re-visited this thread. His shop can't be seen from the road - it is behind his parents' spirit house display. But if you head south from BigC Hang Dong he is about 500 meters along on opposite side of the road. He is very friendly, so I imagine if you call him first to arrange it he will come out the front and wave, or jump up and down or something. 1 Link to comment Share on other sites More sharing options...
8milesfromhome Posted June 3, 2013 Share Posted June 3, 2013 Phone him on 081-724-7172. Hi CBR250, I tried to find this mechanic today but had no luck. Is Khun Neung close to the Big C past Hang Dong? Or is his shop much further down. Also is the shop actually on the roadside of the hwy 108, any signs on the shop or landmarks? I might try to locate him on google street view before i try to find him again. Any extra info you could give would be great! Thanks in advance. Sorry - been a while since I re-visited this thread. His shop can't be seen from the road - it is behind his parents' spirit house display. But if you head south from BigC Hang Dong he is about 500 meters along on opposite side of the road. He is very friendly, so I imagine if you call him first to arrange it he will come out the front and wave, or jump up and down or something. Thanks so much for your help. Ill give him a call! Link to comment Share on other sites More sharing options...
8milesfromhome Posted June 3, 2013 Share Posted June 3, 2013 I assume this is Khun Neungs shop: http://goo.gl/maps/VuqVU Hopefully he'll be able to sort out the Power valve on my Kawasaki Victor S 150. I'm finding it almost impossible to get parts or information on this bike. Very rare bike now days. Link to comment Share on other sites More sharing options...
connda Posted August 25, 2013 Share Posted August 25, 2013 ah, my older thread. just some updates i ended up doing my top overhaul in one of the local bike shop around tanin market area. it was 3000 + baht inclusive of labor, bloody cheap for a piston replacement. before that, i was looking for afew bigger reputable shop but most of them seems to incline more towards bigger and modern bikes eventually i faced a carb problem and got it fixed at one of the recommended bike shop mentioned above, Ray bike shop. He is a very good and honest mechanic, i had been there at least 4 times and every single thing im there, he would be fixing up some bigger choppers and some really rare bikes around here. he must be highly recommended among the local vintage big bikes forum, i always seem him doing work on boxer engines. suspect the r75. he is really just the man to look for, for complete overhaul for bigger older rare bikes. just a note, his shop isn't as clean as some of the sparkling pretentious bigger bike workshops Anybody have a telephone number for Ray Shop's owner? Link to comment Share on other sites More sharing options...
DaamNaam Posted August 25, 2013 Share Posted August 25, 2013 http://richcomotorsports.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now