Popular Post Isaanbiker Posted July 7, 2019 Popular Post Share Posted July 7, 2019 Her problem: Help! This will not go in, just keeps spinning, so does the other one, old ones came out fine??? They will just not finger tighten, I have put them in staight, I have checked they are the correct size! My advice was to take them out, then turn the bike upside down and try it again. No idea if she got that. 1 3 Link to comment Share on other sites More sharing options...
Popular Post jackdd Posted July 7, 2019 Popular Post Share Posted July 7, 2019 (edited) If they just keep spinning they are most likely too small or the thread is damaged Edited July 7, 2019 by jackdd 3 1 1 Link to comment Share on other sites More sharing options...
Popular Post Lacessit Posted July 7, 2019 Popular Post Share Posted July 7, 2019 I hope she does not have the same problems in her sex life. 1 4 Link to comment Share on other sites More sharing options...
CGW Posted July 7, 2019 Share Posted July 7, 2019 33 minutes ago, Isaanbiker said: No idea if she got that. She's not alone is she.............. 1 1 Link to comment Share on other sites More sharing options...
Popular Post VocalNeal Posted July 7, 2019 Popular Post Share Posted July 7, 2019 "standard" plugs are 14mm. Harley/KTM use 12mm but some bikes may use 10mm so check the code of the plugs. https://www.sparkplugs.co.uk/spark-plug-symbol-codes/ So if you try to put plugs for a Harley/KTM into a Honda? They will spin in the hole. 2 2 Link to comment Share on other sites More sharing options...
Popular Post PatOngo Posted July 7, 2019 Popular Post Share Posted July 7, 2019 Pull the plug out, rotate it 180 degrees and put it in the right way around! It's ass about in the photo! 1 2 3 Link to comment Share on other sites More sharing options...
OneMoreFarang Posted July 7, 2019 Share Posted July 7, 2019 She could just ask a motorcycle technician. You can find them everywhere... 2 Link to comment Share on other sites More sharing options...
OneMoreFarang Posted July 7, 2019 Share Posted July 7, 2019 8 minutes ago, PatOngo said: Pull the plug out, rotate it 180 degrees and put it in the right way around! It's ass about in the photo! Obviously you are right. The funny think is that I looked at that picture and I am sure the other guys who commented saw the picture. And we all saw a spark plug - as expected. It's obviously if you really look... 2 Link to comment Share on other sites More sharing options...
Isaanbiker Posted July 7, 2019 Author Share Posted July 7, 2019 1 hour ago, Lacessit said: I hope she does not have the same problems in her sex life. Why? 69ers were always good for me. 1 Link to comment Share on other sites More sharing options...
Isaanbiker Posted July 7, 2019 Author Share Posted July 7, 2019 1 hour ago, OneMoreFarang said: She could just ask a motorcycle technician. You can find them everywhere... Guess you meant a spark plug technician, innit? Link to comment Share on other sites More sharing options...
Isaanbiker Posted July 7, 2019 Author Share Posted July 7, 2019 1 hour ago, VocalNeal said: "standard" plugs are 14mm. Harley/KTM use 12mm but some bikes may use 10mm so check the code of the plugs. https://www.sparkplugs.co.uk/spark-plug-symbol-codes/ So if you try to put plugs for a Harley/KTM into a Honda? They will spin in the hole. Did you not see that the lady has put them in "upside down"- or the "sunny side up" - lol- ???????? 1 Link to comment Share on other sites More sharing options...
Lacessit Posted July 7, 2019 Share Posted July 7, 2019 1 minute ago, Isaanbiker said: Why? 69ers were always good for me. I was thinking more of two items being inserted before one. Ouch. Link to comment Share on other sites More sharing options...
Isaanbiker Posted July 7, 2019 Author Share Posted July 7, 2019 (edited) 1 hour ago, jackdd said: If they just keep spinning they are most likely too small or the thread is damaged Especially when you leave the Electrode out! Oops, not wanting to go off topic, but my best friend just had just experienced something shocking... I wanted to share it with you. No sex before marriage.mp4 Edited July 7, 2019 by Isaanbiker 1 1 Link to comment Share on other sites More sharing options...
Isaanbiker Posted July 7, 2019 Author Share Posted July 7, 2019 To understand why ans where it happened. We've got a nice Yamaha Virago website and whatever your problem is, there are people who can tell you what to do. The lady who's basically the one the thread's all about, was advised by plenty members to just turn the plug around, but that was too complicated. I thought it's worth to share that with gurls who ride bigger bikes. 1 Link to comment Share on other sites More sharing options...
Kwasaki Posted July 7, 2019 Share Posted July 7, 2019 1 hour ago, Isaanbiker said: To understand why ans where it happened. We've got a nice Yamaha Virago website and whatever your problem is, there are people who can tell you what to do. The lady who's basically the one the thread's all about, was advised by plenty members to just turn the plug around, but that was too complicated. I thought it's worth to share that with gurls who ride bigger bikes. That was funny and a good wind up be careful you don't a holiday. ???? 1 Link to comment Share on other sites More sharing options...
Damrongsak Posted July 7, 2019 Share Posted July 7, 2019 The plugs stay cleaner when installed this way. Link to comment Share on other sites More sharing options...
VocalNeal Posted July 8, 2019 Share Posted July 8, 2019 (edited) 12 hours ago, Isaanbiker said: Did you not see that the lady has put them in "upside down"- or the "sunny side up" - lol- ???????? 12 hours ago, Isaanbiker said: Did you not see that the lady has put them in "upside down"- or the "sunny side up" - lol- ???????? Yes but it stated the old ones came out fine so they ( the old ones) must have been in the correct way. I didn't consider it a "710" problem Edited July 8, 2019 by VocalNeal 1 Link to comment Share on other sites More sharing options...
.png.3b3332cc2256ad0edbc2fe9404feeef0.png)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now