Jump to content

Recommended Posts

Posted

i want to replace existing downlights (e27 led) in my suspended ceiling (with staycool 6 inch).


during a brief test, i noticed that the housing (which will be in the ceiling) gets extremely hot.

is this normal, are there alternatives? do other brands (eg phillips) have the same issue?

 

thanks, motdaeng

 

20231003.png

Posted

LEDs will certainly get warm (and you shouldn't cover them with insulation) but "extremely hot" sounds worrying.

 

If it's too hot to touch I'd take it back from whence it came.

 

  • Thumbs Up 1
  • Thanks 1
Posted

12w with 1200LM seems extremally high output as Phillips and others seem to be 800-900LM at a quick search.  I have never used such bulbs as happy with the e27 base leds so no personal knowledge.

  • Like 1
  • Thumbs Up 1
Posted

 

1 hour ago, Crossy said:

... but "extremely hot" sounds worrying ...

after  only 30 min, the housing (in the seeling) was already 60 grad celsius ...

Posted (edited)

I think you would use these to grow new seedlings with weed lol. Again and again it proves itself; paying for quality is so much worth it.

Edited by ChaiyaTH
Posted
8 hours ago, motdaeng said:

i want to replace existing downlights (e27 led) in my suspended ceiling (with staycool 6 inch).


during a brief test, i noticed that the housing (which will be in the ceiling) gets extremely hot.

is this normal, are there alternatives? do other brands (eg phillips) have the same issue?

 

thanks, motdaeng

 

20231003.png

It is normal for the cheaper lights to get hot as they are run as high as possible. The more expensive lights underurn the LEDs and so produce less light but have a much longer life.

 

the highest run lights are unbranded from China the slightly lower run are branded, again from China, then you have the branded but really quite expensive

 

This is an example of the more expensive LEDs

IMG_3533.thumb.jpeg.1d3a7b6e10397b5980a1df005e03e851.jpeg

  • Thanks 1
Posted
On 10/3/2023 at 7:46 AM, motdaeng said:

i want to replace existing downlights (e27 led) in my suspended ceiling (with staycool 6 inch).


during a brief test, i noticed that the housing (which will be in the ceiling) gets extremely hot.

is this normal, are there alternatives? do other brands (eg phillips) have the same issue?

 

thanks, motdaeng

 

 

I just bought 6W spots and LED strips . They all get hot , too hot for my liking. Cheap spotlight are in plastic , not Aluminium , so cooling is even worse.

Like you , I'm about to use the 6 inch Staycool SCG with spots and after reading this here , I start to doubt too.

 

Sorry for going off topic : How do you like these Stay cool from SCG ? Does it really make a difference in heat and noise ? I bought one to see , and 6 inches ?? They are flattend rolled up to maybe 2 inches. Is it worth the 509B ? If it is too far off topic can you PM me , for replies about the staycool. I'm about to buy 40 rolls of them for 100 m2 .

Posted (edited)

You can change your 12w led with 5w led day light 750 lumen (150 lumen/watt) but pay attention at the dimension because I have installed on my saloon. The dimension is 5 cm diameter / 5.8 cm hight.

I have installed them in the concealed lighting in the living room of my house for over 2 years in Greece. Perfect /excellent and they are very economic in electricity consumption. Source:https://www.ledmall.gr/product/σποτ-led-gu10-smd-5w-230v-110-750lm-ip20-evolution-150lm-w-άσπρο-σώμα-φυσικό-λευ/

 

Edited by Paris333
Posted

leds downlight can get hot as 50-60 C with an 9 W led, your fingers dont like that.

I cant touch a running led light bulb 9W 1000 lumen, my fingers protest.

You have a 12 W, so higher, therefor more heat. Led 's put 10 % to heat and merely in light. In instructions also comes (should) how to built in and how much free space, not to be ignored. You had it in test , so probably wide open and you fond out, it gets hot.

I dont see cooling fins, but there are led downlights which have cooling fins  

So they would/should be cooler? The cooling section is bigger so it should, of course you dont put anything on top of it as an isolation

image.png.ca73cf064add1962d270dc72c59b52c8.png

 

You also see in the description of your lights, they will get to 50 -ish C.

Depending on temperature difference between light and air, heat flow is better or less. Also constructions of lights have an effect on heat transport. 

https://www.kt.market/product/iwachi-โคมฝังฝ้า-4-12w-กลม-iwc-panel-4-12w-r-แสงขาว/

So what is hot, 50 C? You didnt measure.

Maybe try baking an egg on it, if you succeed in short time, probably too hot.555

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Topics

  • Latest posts...

    1. 32

      'Deception and denial': Voter views reveal dark truth about Trump's 'mandate'

    2. 0

      Man, 60, Commits Suicide After Shooting Two Women in Phra Nakhon Si Ayutthaya

    3. 1

      Authorities Raid Illegal Shop Selling Kratom, Cannabis, & E-Cigarettes in Sisaket

    4. 14

      Thailand Live Monday 25 November 2024

    5. 0

      Human Skeleton Found Scattered in Paddy Field, Police Investigating

    6. 1

      5,000 Litres of Smuggled Fuel Seized in Satun Waters

    7. 651

      Thailand's Expats Urged to Register with TRD for Tax, Says Expert

    8. 57

      Getting Old: Stoic About It or Endless Whinger?

  • Popular in The Pub


×
×
  • Create New...