Running all electrical wiring through blue pipe.

[giddyup]

My partner has suddenly got it in her head that running all the electrical wiring in the ceiling using  blue water pipe as a conduit is a great idea. This idea has come to her through a neighbor who has had it done for safety reasons, ie no chance of shorts through insect or animal activity.

We've lived in the house for 15 years without a problem, so my attitude is if it ain't broke, don't fix it.

What do you think, good idea, or not? Total cost 6000 baht.

[CLW]

Why not using the white or yellow PVC pipes. They are specifically for wiring. I'm guessing they are harder to ignite and maybe have some self extinguishing properties. 

[Crossy]

@CLW beat me by milliseconds!!

 

The yellow or white PVC is actually intended for electrical, the bends available are more conducive to get cables in and, because it's thin walled (doesn't need to hold pressure) it "should" be cheaper.

 

Is your current wiring naked singles or muli-core sheathed?? If you don't have a creature problem, why fix it?

 

Our stuff that's in the ceiling spaces and not fixed to the wall is actually in flexy metal conduit as installed by sparky long ago.

 

EDIT Is your peaceful life + nookie worth 6k Baht? 

 

 

[BritManToo]

Waste of money.

Wires in free air can take more current than wires in pipe.

[giddyup]

4 minutes ago, BritManToo said:

Waste of money.

Wires in free air can take more current than wires in pipe.

Really?🤔

[connda]

We rewired the house about 7 years back and we put all of the wiring in electrical conduit. Really.  Up to you regarding how safe you want your residential wiring.  It didn't cost that much more and we did two houses. If I had to do it again, I'd do it again. 

[giddyup]

16 minutes ago, Crossy said:

@CLW beat me by milliseconds!!

 

The yellow or white PVC is actually intended for electrical, the bends available are more conducive to get cables in and, because it's thin walled (doesn't need to hold pressure) it "should" be cheaper.

 

Is your current wiring naked singles or muli-core sheathed?? If you don't have a creature problem, why fix it?

 

Our stuff that's in the ceiling spaces and not fixed to the wall is actually in flexy metal conduit as installed by sparky long ago.

 

EDIT Is your peaceful life + nookie worth 6k Baht? 

 

 

It's not the money, It's possibly creating a problem you never had before.

[connda]

19 minutes ago, Crossy said:

@CLW beat me by milliseconds!!

 

The yellow or white PVC is actually intended for electrical, the bends available are more conducive to get cables in and, because it's thin walled (doesn't need to hold pressure) it "should" be cheaper.

 

Is your current wiring naked singles or muli-core sheathed?? If you don't have a creature problem, why fix it?

 

Our stuff that's in the ceiling spaces and not fixed to the wall is actually in flexy metal conduit as installed by sparky long ago.

 

EDIT Is your peaceful life + nookie worth 6k Baht? 

 

 

Ditto!

[impulse]

33 minutes ago, giddyup said:

40 minutes ago, BritManToo said:

Waste of money.

Wires in free air can take more current than wires in pipe.

Really?

 

It's true because they dissipate heat better if they're not in a conduit.  Of course, that's not the only deciding factor.  Especially if you have vermin that chew on exposed wires.

 

 

[sometimewoodworker]

36 minutes ago, giddyup said:

43 minutes ago, BritManToo said:

Waste of money.

Wires in free air can take more current than wires in pipe.

Really?🤔

Absolutely, in free air the heat induced by the current can dissipate easily.

That is why the power rating is different for wires in conduit (about 20%) compared to wires clipped to walls etc.

[BritManToo]

51 minutes ago, giddyup said:

Really?🤔

2.5mm twin 20a max in conduit, 27a max in free air.

A fairly significant difference.

[impulse]

1 hour ago, Crossy said:

Is your current wiring naked singles or muli-core sheathed?? If you don't have a creature problem, why fix it?

 

My 2 cents.  Just because you don't have vermin today doesn't mean you never will.  For $175 USD, (6K Baht) I'd pull that trigger.  And not worry about that rustling sound in the attic later.

 

Edit:  That's after checking the ampacity in conduit and being sure that's not going to cause an unintended consequence.  If you need to upsize the wire, that may blow the budget.  Sadly, all my ampacity charts are based on the NFPA published NEC and AWG wire.  (Yank stuff)  Not metric.  I'm sure someone here has an mm2 chart.

 

 

 

[Crossy]

20 minutes ago, impulse said:

 

My 2 cents.  Just because you don't have vermin today doesn't mean you never will.  For $175 USD, (6K Baht) I'd pull that trigger.  And not worry about that rustling sound in the attic later.

 

Edit:  That's after checking the ampacity in conduit and being sure that's not going to cause an unintended consequence.  If you need to upsize the wire, that may blow the budget.  Sadly, all my ampacity charts are based on the NFPA published NEC and AWG wire.  (Yank stuff)  Not metric.  I'm sure someone here has an mm2 chart.

 

 

https://www.doncastercables.com/technical-help/

 

[impulse]

2 minutes ago, Crossy said:

https://www.doncastercables.com/technical-help/

 

Thanks for that. 

 

One additional suggestion I have is to measure the diameter your wire (conductor) with a caliper.  Not all markings are honest.  Some, not even close.

 

 

 

[giddyup]

1 hour ago, sometimewoodworker said:

Absolutely, in free air the heat induced by the current can dissipate easily.

That is why the power rating is different for wires in conduit (about 20%) compared to wires clipped to walls etc.

Does this different power rating affect power to appliances etc?

[giddyup]

1 hour ago, impulse said:

 

My 2 cents.  Just because you don't have vermin today doesn't mean you never will.  For $175 USD, (6K Baht) I'd pull that trigger.  And not worry about that rustling sound in the attic later.

 

Edit:  That's after checking the ampacity in conduit and being sure that's not going to cause an unintended consequence.  If you need to upsize the wire, that may blow the budget.  Sadly, all my ampacity charts are based on the NFPA published NEC and AWG wire.  (Yank stuff)  Not metric.  I'm sure someone here has an mm2 chart.

 

 

 

This work would be done by local Thais, how qualified or experienced they are to do things like check ampacity, I don't know.

[giddyup]

1 hour ago, BritManToo said:

2.5mm twin 20a max in conduit, 27a max in free air.

A fairly significant difference.

Are there any consequences to this?

[sometimewoodworker]

1 hour ago, giddyup said:

Does this different power rating affect power to appliances etc?

It affects the maximum power available on a circuit before it gets too warm. So decide on the maximum power you want to use and then make sure you have enough circuits for the load. Things like instant water heaters and AC’s should have dedicated circuits and for water heaters 4mm cable at least