Russell17au Posted December 10, 2021 Share Posted December 10, 2021 On 7th December when I shutdown one of my laptops it went into the automatic Microsoft Update before closing down and the following morning I started the laptop and it went through the usual update procedure before it opened the programs but when it came to the screen to sign in it was different because instead of the box under my name that I put my password in there was just a sign that said "sign in" and when I click on that it says "Just a moment" and the usual little wheel rotates but then it goes back to the "Sign in" screen and the computer does not open. I contacted Microsoft Support on December 8 and they told me it was a gliche in the system and to wait for 1 hour and try again. Well I waited and nothing changed so I packed the laptop away as it cannot be used and this morning December 10 I got the laptop out and tried it but it is still the same as December 8. Laptop unusable. Anyone else have any problems with Microsoft Updates? Link to comment Share on other sites More sharing options...
Crossy Posted December 10, 2021 Share Posted December 10, 2021 Which Windoze version? I had something very similar happen (it lost my PIN) which actually meant I had to do a re-install, even a refresh didn't fix it ???? 1 Link to comment Share on other sites More sharing options...
Popular Post Gsxrnz Posted December 10, 2021 Popular Post Share Posted December 10, 2021 (edited) Try opening in safe mode and restore to a previous backup point to unwind the upgrade, and then turn off auto update. Mind you, the chances of there being a valid restoration point available is akin to winning the Thai lottery. I did it successfully recently and had a hard on for a week! Edited December 10, 2021 by Gsxrnz 3 Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 Windows 10 major update to version 21H1 October 5 2020. This was a minor update that they got wrong Link to comment Share on other sites More sharing options...
ArcticFox Posted December 10, 2021 Share Posted December 10, 2021 Install Linux. Then add a Virtual Machine application like Oracle's VirtualBox. Install WIndows 10 in VirtualBox as a virtual machine. Get your Windows set up the way you want and then make cloned copies. Then when Windows Update screws up your installation, you can simply bring up the cloned copy and you're back in business within a couple of minutes. it will make your life a whole lot easier. MS Windows is a poorly designed OS. 1 1 Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 34 minutes ago, Gsxrnz said: Try opening in safe mode and restore to a previous backup point to unwind the upgrade, and then turn off auto update. Mind you, the chances of there being a valid restoration point available is akin to winning the Thai lottery. I did it successfully recently and had a hard on for a week! Ok, I tried opening the laptop via the Bios and I used the ESC key whilst turning the laptop on but it would not open the Bios so that I could select "Safe Mode". It just went straight to go into Windows with the same result as before. Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 26 minutes ago, ArcticFox said: Install Linux. Then add a Virtual Machine application like Oracle's VirtualBox. Install WIndows 10 in VirtualBox as a virtual machine. Get your Windows set up the way you want and then make cloned copies. Then when Windows Update screws up your installation, you can simply bring up the cloned copy and you're back in business within a couple of minutes. it will make your life a whole lot easier. MS Windows is a poorly designed OS. The problem is that I cannot get into the computer to install Linux Link to comment Share on other sites More sharing options...
OneMoreFarang Posted December 10, 2021 Share Posted December 10, 2021 1 hour ago, Crossy said: I had something very similar happen (it lost my PIN) which actually meant I had to do a re-install, even a refresh didn't fix it ???? No Windows system has just a PIN. If it has a PIN then it also has a password. Use option B if option A does not work. Link to comment Share on other sites More sharing options...
userabcd Posted December 10, 2021 Share Posted December 10, 2021 Do you have stuff on the disk which you need to keep and do you have a bootable copy of windows on a usb or CD? Link to comment Share on other sites More sharing options...
userabcd Posted December 10, 2021 Share Posted December 10, 2021 Can try this? https://gearnuke.com/get-past-windows-user-login-screen-fix/2/ Link to comment Share on other sites More sharing options...
userabcd Posted December 10, 2021 Share Posted December 10, 2021 (edited) 20 minutes ago, Russell17au said: Ok, I tried opening the laptop via the Bios and I used the ESC key whilst turning the laptop on but it would not open the Bios so that I could select "Safe Mode". It just went straight to go into Windows with the same result as before. You must get into windows safe mode. https://support.microsoft.com/en-us/windows/start-your-pc-in-safe-mode-in-windows-92c27cff-db89-8644-1ce4-b3e5e56fe234#WindowsVersion=Windows_10 Edited December 10, 2021 by userabcd Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 6 minutes ago, userabcd said: You must get into windows safe mode. https://support.microsoft.com/en-us/windows/start-your-pc-in-safe-mode-in-windows-92c27cff-db89-8644-1ce4-b3e5e56fe234#WindowsVersion=Windows_10 It seems to be very hard for people to understand that I cannot get into the computer to go into safe mode Link to comment Share on other sites More sharing options...
Crossy Posted December 10, 2021 Share Posted December 10, 2021 31 minutes ago, OneMoreFarang said: No Windows system has just a PIN. If it has a PIN then it also has a password. Use option B if option A does not work. I did of course, and despite me knowing the password it still didn't let me in (incorrect password). Trust me, I did everything. Nothing lost as I had a system backup from a short time before and my documents are in cloud storage. And of course the "incorrect password" works just fine on the restored system. 1 1 Link to comment Share on other sites More sharing options...
tgw Posted December 10, 2021 Share Posted December 10, 2021 1 minute ago, Crossy said: I did of course, and despite me knowing the password it still didn't let me in (incorrect password). Trust me, I did everything. Nothing lost as I had a system backup from a short time before and my documents are in cloud storage. And of course the "incorrect password" works just fine on the restored system. one thing that got me scratching my head for some time was the same "wrong password" problem - the update changed my keyboard settings, so that the key mappings were different. 1 1 Link to comment Share on other sites More sharing options...
Crossy Posted December 10, 2021 Share Posted December 10, 2021 Just now, tgw said: one thing that got me scratching my head for some time was the same "wrong password" problem - the update changed my keyboard settings, so that the key mappings were different. Yup, thought of that one too (view password) as my PW does contain special characters. Link to comment Share on other sites More sharing options...
tgw Posted December 10, 2021 Share Posted December 10, 2021 (edited) 6 minutes ago, Russell17au said: It seems to be very hard for people to understand that I cannot get into the computer to go into safe mode if you can get to the login screen, then you can go into safe mode. the usual key to boot into windows safe mode is F8. press F8 when you start up your computer and windows should start right into safe mode Edited December 10, 2021 by tgw 1 1 Link to comment Share on other sites More sharing options...
JetsetBkk Posted December 10, 2021 Share Posted December 10, 2021 5 minutes ago, Russell17au said: It seems to be very hard for people to understand that I cannot get into the computer to go into safe mode Have you got a smart phone? Can you take a picture of the laptop screen and post it? Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 55 minutes ago, userabcd said: You must get into windows safe mode. https://support.microsoft.com/en-us/windows/start-your-pc-in-safe-mode-in-windows-92c27cff-db89-8644-1ce4-b3e5e56fe234#WindowsVersion=Windows_10 It seems to be very hard for people to understand that I cannot get into the computer to go into safe mode Link to comment Share on other sites More sharing options...
userabcd Posted December 10, 2021 Share Posted December 10, 2021 26 minutes ago, Russell17au said: It seems to be very hard for people to understand that I cannot get into the computer to go into safe mode In your posts you mentioned getting into bios safe mode? But you need to get into windows safe mode to try solve windows password issue. Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 Now this computer is repeating my previous posts Link to comment Share on other sites More sharing options...
Russell17au Posted December 10, 2021 Author Share Posted December 10, 2021 Thanks everybody for your help and suggestions but it looks like I need to take it to someone who know what to do as I know how to operate a computer but I am not that savy when it gets to things like this 1 Link to comment Share on other sites More sharing options...
Bruno123 Posted December 10, 2021 Share Posted December 10, 2021 2 hours ago, Russell17au said: On 7th December when I shutdown one of my laptops it went into the automatic Microsoft Update before closing down and the following morning I started the laptop and it went through the usual update procedure before it opened the programs but when it came to the screen to sign in it was different because instead of the box under my name that I put my password in there was just a sign that said "sign in" and when I click on that it says "Just a moment" and the usual little wheel rotates but then it goes back to the "Sign in" screen and the computer does not open. I contacted Microsoft Support on December 8 and they told me it was a gliche in the system and to wait for 1 hour and try again. Well I waited and nothing changed so I packed the laptop away as it cannot be used and this morning December 10 I got the laptop out and tried it but it is still the same as December 8. Laptop unusable. Anyone else have any problems with Microsoft Updates? It sounds as if a new feature version was installed. Somehow changed your Local account sign-in to a Microsoft account sign-in. But you don't have an associated Microsoft account, do you? 1 1 Link to comment Share on other sites More sharing options...
GrandPapillon Posted December 10, 2021 Share Posted December 10, 2021 looks like they switched you to an "online" sign-on, instead of the "local" sign-on typical MS, bait and switch, another reason why I disable "auto-update" and do only "selective" updates look for a tiny link at the bottom that says "skip this", I came to something like this once, and was able to "skip" it. Not 100% sure how. 2 Link to comment Share on other sites More sharing options...
JimmyJ Posted December 10, 2021 Share Posted December 10, 2021 This is why for my next computer I will purchase MS Professional, simply to be able to turn off forced Updates. Link to comment Share on other sites More sharing options...
GrandPapillon Posted December 10, 2021 Share Posted December 10, 2021 Just now, JimmyJ said: This is why for my next computer I will purchase MS Professional, simply to be able to turn off forced Updates. don't think you can on Pro version, only "suspend" for 1 month or more the "Home" version let you suspend for up to 1 month 1 Link to comment Share on other sites More sharing options...
GrandPapillon Posted December 10, 2021 Share Posted December 10, 2021 and you can "upgrade" to Pro, without re-installing or buy a new PC, just update the OEM license key 1 Link to comment Share on other sites More sharing options...
Bruno123 Posted December 10, 2021 Share Posted December 10, 2021 Have you signed into the Microsoft Store using a Microsoft account ever or used Microsoft PIN to sign in?? Anyway, you can see how Safe Mode looks to you: https://support.lenovo.com/hn/en/solutions/ht105328-f8-or-fn-f8-key-not-able-to-enter-safe-mode-in-windows-10-thinkpad If no use, you can go in to enable the hidden Administrator account: https://www.isumsoft.com/it/enable-hidden-administrator-account-in-windows-10-without-login/ Once in you can revert back to a Local account from the current push to get you to use a Microsoft sign in. Link to comment Share on other sites More sharing options...
JimmyJ Posted December 11, 2021 Share Posted December 11, 2021 (edited) 23 hours ago, GrandPapillon said: don't think you can on Pro version, only "suspend" for 1 month or more the "Home" version let you suspend for up to 1 month My experience with the Home MS software is there is no stated specific amount of time to postpone the updates - it is possible sometimes to put it off that day but eventually it forces install - often long before 1 month. Edited December 11, 2021 by JimmyJ Link to comment Share on other sites More sharing options...
Russell17au Posted December 11, 2021 Author Share Posted December 11, 2021 28 minutes ago, JimmyJ said: My experience with the Home MS software is there is no stated specific amount of time to postpone the updates - it is possible sometimes to put it off that day but eventually it forces install - often long before 1 month. I have just gone into settings on this computer and it states under the Windows updates that you can only pause the Windows updates for 7 days but I have also seen somewhere that you can pause the updates for a maximum of 35 days but I cannot remember where it was Link to comment Share on other sites More sharing options...
GrandPapillon Posted December 11, 2021 Share Posted December 11, 2021 1 hour ago, JimmyJ said: My experience with the Home MS software is there is no stated specific amount of time to postpone the updates - it is possible sometimes to put it off that day but eventually it forces install - often long before 1 month. they do sneak some "updates" download but not install them, I usually delete the downloads manually, a PITA Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now