Neilly Posted March 13, 2013 Share Posted March 13, 2013 Yeah in a way I wish I'd bought a 2nd hand bike then the sand and salt wouldn't bother me as much You could have got a Chinese one.... Link to comment Share on other sites More sharing options...
mania Posted March 13, 2013 Share Posted March 13, 2013 I have not tried it as I do not live near salt spray but,I have always read that folks buy cheap silicone spray& spray their bikes.Another product which costs more & I dont know if it is available hereis Boeshield T-9 I think I would just go with a cheap silicone spray. Should be good for a week or two at a time & help. OF course if you get direct salt spray off the ocean alloy things may get pitted no matter what depending on where you store the bike. So covered would be best when not in use. Link to comment Share on other sites More sharing options...
Neilly Posted March 13, 2013 Share Posted March 13, 2013 I think I would just go with a cheap silicone spray. Should be good for a week or two at a time & help. OF course if you get direct salt spray off the ocean alloy things may get pitted no matter what depending on where you store the bike. So covered would be best when not in use. A few of my friends used to do Weston beach race (I never did it as didn't want to wreak my bike)...you would be surprised how far wet sand can get in and the damage it can cause Link to comment Share on other sites More sharing options...
mania Posted March 13, 2013 Share Posted March 13, 2013 (edited) A few of my friends used to do Weston beach race (I never did it as didn't want to wreak my bike)...you would be surprised how far wet sand can get in and the damage it can causeYes it & the sale especially is very corrosive to everything even glass. I lived on beaches a lot in my life & the homes take a beating too. Even the glass windows get pitted & rough from salt spray from the surf. Edited March 13, 2013 by mania Link to comment Share on other sites More sharing options...
Neilly Posted March 13, 2013 Share Posted March 13, 2013 A few of my friends used to do Weston beach race (I never did it as didn't want to wreak my bike)...you would be surprised how far wet sand can get in and the damage it can causeYes it & the sale especially is very corrosive to everything even glass.I lived on beaches a lot in my life & the homes take a beating too. Even the glass windows get pitted & rough from salt spray from the surf. Yeah is nasty stuff for sure...they used to replace their wheel bearings and swinging arm bushes/bearings as soon as they got home, but a couple of months later all sorts of random stuff would fail as well Link to comment Share on other sites More sharing options...
taninthai Posted March 13, 2013 Share Posted March 13, 2013 Yeah in a way I wish I'd bought a 2nd hand bike then the sand and salt wouldn't bother me as much You could have got a Chinese one.... Even though it's only 20 meters from where I park the bike to the beach I'd be scared it would breakdown/fall apart before I got it on the sand......lol Link to comment Share on other sites More sharing options...
wantan Posted March 13, 2013 Share Posted March 13, 2013 Yeah in a way I wish I'd bought a 2nd hand bike then the sand and salt wouldn't bother me as much You could have got a Chinese one.... He could have three Lifan Cross for the price of one CRF. One parked directly at the beach. One for shopping. And the third for rent to customers to get the money back he payed for the bikes Link to comment Share on other sites More sharing options...
nikster Posted March 13, 2013 Share Posted March 13, 2013 Yeah in a way I wish I'd bought a 2nd hand bike then the sand and salt wouldn't bother me as much You could have got a Chinese one.... He could have three Lifan Cross for the price of one CRF. One parked directly at the beach. One for shopping. And the third for rent to customers to get the money back he payed for the bikes 3 Lifan Cross: One is in the shop, one for spare parts, and the third for riding... there, fixed that for you :D Link to comment Share on other sites More sharing options...
taninthai Posted March 13, 2013 Share Posted March 13, 2013 Oh yes imagine the headaches all three bikes with problems,dead customers where the brakes or wheel bearings failed,me having to sleep in the jungle overnight cause the bike failed me ,don't sound like much fun to me....lol Link to comment Share on other sites More sharing options...
wantan Posted March 13, 2013 Share Posted March 13, 2013 Oh yes imagine the headaches all three bikes with problems,dead customers where the brakes or wheel bearings failed,me having to sleep in the jungle overnight cause the bike failed me ,don't sound like much fun to me....lol Bike rentals at the beaches mostly give out dangerous crappy bikes. You oviously worry too much. Take the thai people for example. They buy expensive Hondas, but do they worry about it? About resale value? About salt and sand, sun or rain? They ride the thing till it falls apart. And often that doesn't take long Link to comment Share on other sites More sharing options...
loserlazer Posted March 13, 2013 Share Posted March 13, 2013 (edited) I m sure lifan dissolves there like a sheet of toilet paper! Tanin just ride it like you stole it man. Forget sand and salt. Dont worry. How many times can someone live and ride on a place like that in our lives?! Edited March 13, 2013 by loserlazer Link to comment Share on other sites More sharing options...
JonnyF Posted March 14, 2013 Share Posted March 14, 2013 I think I would just go with a cheap silicone spray. Should be good for a week or two at a time & help. OF course if you get direct salt spray off the ocean alloy things may get pitted no matter what depending on where you store the bike. So covered would be best when not in use. A few of my friends used to do Weston beach race (I never did it as didn't want to wreak my bike)...you would be surprised how far wet sand can get in and the damage it can cause Weston beach race is brutal on bikes, not really comparable to riding on a beach in Thailand IMO. I never did the beach race but I used to ride a lot at Matchams MX World which is mainly sand. I never had any major issues, just jet washed the bike at the track before I packed up to leave and sprayed it with WD40. Link to comment Share on other sites More sharing options...
Neilly Posted March 14, 2013 Share Posted March 14, 2013 A few of my friends used to do Weston beach race (I never did it as didn't want to wreak my bike)...you would be surprised how far wet sand can get in and the damage it can cause Weston beach race is brutal on bikes, not really comparable to riding on a beach in Thailand IMO. I never did the beach race but I used to ride a lot at Matchams MX World which is mainly sand. I never had any major issues, just jet washed the bike at the track before I packed up to leave and sprayed it with WD40. I think the word Brutal was invented for the Weston beach race I used to do lots of Enduro's and some were in sand, Bordon being the worst, and didn't have any real problems but sand on a beach is a whole different thing Link to comment Share on other sites More sharing options...
taninthai Posted March 15, 2013 Share Posted March 15, 2013 So I have been reading another forum and a few guys have swapped out their ecu and throttle body for the cbr ecu and 38 mm throttle body parts cost around 6000 bht and apparently big difference especially in 3rd to 6th gears any opinions on weather this Is a good idea any possible damage to other engine parts. Link to comment Share on other sites More sharing options...
mania Posted March 15, 2013 Share Posted March 15, 2013 (edited) So I have been reading another forum and a few guys have swapped out their ecu and throttle body for the cbr ecu and 38 mm throttle body parts cost around 6000 bht and apparently big difference especially in 3rd to 6th gears any opinions on weather this Is a good idea any possible damage to other engine parts.Interesting I cannot see as there could be any damages inflicted due to the swap They just increase fuel with the 38mm & needed the map of the cbr ecu What sized throttle body comes stock on the Crf? 36mm? Same as we use to do with carburetor bikes. But we could adjust spark timing manually since it was pre-ecu I imagine that mod coupled with a less restrictive exhaust & air filter than stock would see even more gains...whether or not the cbr map would then be sufficient is another story An adjustable ecu would be nice Edited March 15, 2013 by mania Link to comment Share on other sites More sharing options...
taninthai Posted March 15, 2013 Share Posted March 15, 2013 I think I will ask a few questions on the other forum tonight you must lose your low down power on the CRf if you do this which might not be two clever if off roading,might have to go and hire myself a cbr 250 for the day see what the actual power differences are between the two bikes. Link to comment Share on other sites More sharing options...
mania Posted March 15, 2013 Share Posted March 15, 2013 (edited) I think I will ask a few questions on the other forum tonight you must lose your low down power on the CRf if you do this which might not be two clever if off roading,might have to go and hire myself a cbr 250 for the day see what the actual power differences are between the two bikes.Not necessarily mild Increased fuel flow or intake or exhaust does not have to translate to bogging or loss of low end power. Of course gearing & everything needs to be in sync for increased top speed change but initially increasing flow in this small way is not going to be big enough to change low end IMO It will increase high end though for sure & will not *improve* low end but, should not hurt it either. Because low end is at partial throttle opening not full. You still have the same ability to only crack the throttle partially on low end. If one went crazy & moved up a few more mm in throttle body size then yes bogging off the bottom would be likely. As valve & cam timing for such a large increase would be off too But your idea to compare power characteristics of the cbr is a good idea. But remember the other differences & take them into consideration gearing,weight,intake & exhaust systems Edited March 15, 2013 by mania Link to comment Share on other sites More sharing options...
taninthai Posted March 15, 2013 Share Posted March 15, 2013 Not a nice thing to do but while I'm renting the cbr 250 I could just do a straight swap with the ecu and throttle body ,the hire shop will just get a slightly slower cbr back and I will have got a free modification on my bike,it's just a thought. I'm not really the sort of person to pull a move like that but I could just swap them over to test it out ,the ecu is a two minuits plug in job what would be the likely effect on my bike if just changed ecu and not the throttle body. Link to comment Share on other sites More sharing options...
mania Posted March 15, 2013 Share Posted March 15, 2013 I'm not really the sort of person to pull a move like that but I could just swap them over to test it out ,the ecu is a two minuits plug in job what would be the likely effect on my bike if just changed ecu and not the throttle body.I cannot imagine swapping just the ECU from a bike with a bigger throttle body would be a good idea. The ECU is after all a small computer with instructions to monitor fuel injection,ignition timing,& exhaust emissions. Taking the one off the CBR & putting it on yours with smaller throttle body might be interpreted by the computer as a lean condition. Is it true that the Honda CBR ECU's have a limp home mode? Meaning once an engine malfunction light is tripped the ecu resorts to a lesser flow map to reduce injury to engine but allow you to limp home? Later the ECU is supposedly reset by disconnecting the battery I believe I read. I am not sure of any of that & have only read it on various forums. That aside, yes I cannot imagine a benefit by changing the ecu/instructions to the injectors,ignition etc. without the hardware change to carry out or benefit from those instructions. Link to comment Share on other sites More sharing options...
430xc Posted March 16, 2013 Share Posted March 16, 2013 I hope I am not being inappropriate by asking this. I have read about prices on this and other forums for a crf250l. But when I asked a small dealer in Korat, then told me 150,000 baht. Maybe they were just shining me on. Are they still going out the showroom doors for 126,000 to 130,000 baht? Thanks Link to comment Share on other sites More sharing options...
taninthai Posted March 16, 2013 Share Posted March 16, 2013 think its a bit difficult to find them at 126k but any thing between 130-140k seems to be the price now ,if i was in the market to buy one now i would think 130 k is a good and fair price, if your paying cash just walk in a dealer that has one in stock and show them the 130k i reckon they will bite your hand of for the cash....... Link to comment Share on other sites More sharing options...
Neilly Posted March 17, 2013 Share Posted March 17, 2013 I hope I am not being inappropriate by asking this. I have read about prices on this and other forums for a crf250l. But when I asked a small dealer in Korat, then told me 150,000 baht. Maybe they were just shining me on. Are they still going out the showroom doors for 126,000 to 130,000 baht? Thanks Just paid 133k in Samui so there will be cheaper about...I got the misses to phone the 126k ad (a few pages back) and they said they'd all gone. As Tanin said, go in with 130k and see what happens Link to comment Share on other sites More sharing options...
Neilly Posted April 24, 2013 Share Posted April 24, 2013 Ordered a few bits and pieces for the bike just before I went back to work from CRF’s Only ([email protected]) and am wellimpressed. I bought the Flatland Racing bash plate and radiator guard, plus fender eliminator, 13t front sprocket and bark busters. Bash Plate Radiator Guard Tail Tidy Bark Busters & Sprocket Only slight problem now is I don’t have a bike to put them on...the day before I went back to work a friend came round and asked to have ago before he went and bought one...’You bin it you buy it’ came into play and the bike now belongs to him. I was hoping that my new one would have turned up before I got back from work, but alas it hasn’t. According to the shop the production line is knocking out the CFR250M’s at the moment and will have to wait until next month for an ‘L’ ... Link to comment Share on other sites More sharing options...
taninthai Posted April 24, 2013 Share Posted April 24, 2013 Nice at least you will have a brand new bike to put it all on,did you get this stuff delivered to Thailand if so what was delivery and customs cost. Link to comment Share on other sites More sharing options...
Neilly Posted April 24, 2013 Share Posted April 24, 2013 Nice at least you will have a brand new bike to put it all on,did you get this stuff delivered to Thailand if so what was delivery and customs cost. Yeah...just hoping it is in a few days and not weeks I had to have the stuff delivered to Oman because that's where my paypal address was (now changed)...they shipped Fedex and took about 5 days and US$114 Link to comment Share on other sites More sharing options...
stoneyboy Posted May 20, 2013 Share Posted May 20, 2013 My recently purchased CRF from fellow TV member taninthai being put to good use around Lom Sak,Phetchabun. Thanks very much. Link to comment Share on other sites More sharing options...
sup3r1or Posted May 20, 2013 Share Posted May 20, 2013 Anyone knows the price of CRF250M? Link to comment Share on other sites More sharing options...
stoneyboy Posted May 20, 2013 Share Posted May 20, 2013 Anyone knows the price of CRF250M? Was quoted 159,000 baht in Phetchabun all in. Link to comment Share on other sites More sharing options...
taninthai Posted May 20, 2013 Share Posted May 20, 2013 My recently purchased CRF from fellow TV member taninthai being put to good use around Lom Sak,Phetchabun. ImageUploadedByThaivisa Connect Thailand1369052452.481771.jpg ImageUploadedByThaivisa Connect Thailand1369052469.457204.jpgImageUploadedByThaivisa Connect Thailand1369052482.749162.jpgImageUploadedByThaivisa Connect Thailand1369052497.964246.jpg Thanks very much. mmm not envious at all sitting in uk looking at my old bike.......lol new plastics and new rear tyre looking good happy trails. Link to comment Share on other sites More sharing options...
Neilly Posted May 21, 2013 Share Posted May 21, 2013 Anyone knows the price of CRF250M? Asked a couple of weeks ago...think it was 145,000 (Samui) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now