Jump to content

What would you do : visually level or real level


Metropolitian

What would you do : visually level or real level  

17 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

We are living in a townhouse, in the whole street the ground in the back has sunk a little.

Put a ball on the floor, and it will roll to the back. And so does fluids..

 

Rough measurement gives 10 cm over a distance of 12 meters. Close to a sinking ship ????

 

I did mount a whiteboard last week, which is 120cm wide. And when drilling the holes I used a level.

Now I moved a cabinet under it, at the right side it fits nicely under the board and at the left there is a gap of 1 cm.

 

 

 

Now what would you do when you hang up a TV, art or anything else on the wall.

Level to your eyes or level to the gravity?


 

 

 

 

Edited by Metropolitian
adding poll..
Link to comment
Share on other sites

haha ... My eyes are my level ...... Eyes first .. then level .. its 99% within the black lines ....

 

It has to be level ... the floor or ceiling  is irrelevant - Gravity every time ... My rationale is .. if I can influence it .. it has to be level ... Why not level up the cabinet - blocks under the feet .. ?

  • Like 2
Link to comment
Share on other sites

It depends on 3 things: 1. If it looks out of place when you use a spirit level, level with your eye.

2. If it looks OK with the level, use that.

3. If your Thai Mrs tells you when it's level, always follow that advice.

 

  • Like 2
Link to comment
Share on other sites

5 hours ago, BritManToo said:

Wedge under the cabinet leg.

+

17 hours ago, rvaviator said:

Why not level up the cabinet - blocks under the feet .. ?

Two reasons why not; there are two of them sitting next to each other. And the material is mdf which is prone to sag and flat at the bottom so using wedges it would give a gap at the left side at the bottom.

 

I'm now using small peggies, on points where the pressures are high, and lift the cabinet 0.5cm from the floor to avoid water going into the wood.

 

Having stuff on the cabinet the gap is barely seen now.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...