Cbr 500Cc Leaked Pic

[ll2]

mania corse pipe is 13 k i remember so header will cost 5000 thb then?

alias guy promised me a discount so i can get it i think for 5 k.

but not sure for a full system before pc5 and not sure for pc5 either.

waiting for new honda offerings

[mania]

mania corse pipe is 13 k i remember so header will cost 5000 thb then?

alias guy promised me a discount so i can get it i think for 5 k.

but not sure for a full system before pc5 and not sure for pc5 either.

waiting for new honda offerings

Well you may need a controller after the full system or maybe not.

If you want to try a cheap alternative the AP Bike Shop 122

seems to sell a lot of those little GLP hipermap boxes

As far as I can tell they work kind of like a PC5 except I think they work mainly on the O2 side

of the loop.

Comes with 2 maps I think & runs about 2k baht

Their installer could use some beautify lessons though

zip tied to the frame??

They have a FB page

Edited August 26, 2013 by mania

[ll2]

^

that sounds good mania. if they have something properly working for 2 k, i am ok to go full system exhaust.

airbox mod and a nice air filter, it can be superb.

could not find info about it but sending them a pm now. no phone number also.

Edited August 26, 2013 by ll2

[mania]

^

that sounds good mania. if they have something properly working for 2 k, i am ok to go full system exhaust.

airbox mod and a nice air filter, it can be superb.

could not find info about it but sending them a pm now. no phone number also.

LL. I have no experience with the product but noticed it & see one shop here (Pekky)

installing them too.

Here is AP's Fb page/contact info

https://www.facebook.com/pages/Apbikeshop122/462756580434641?id=462756580434641&sk=info

GLP Hipermap FB & Website

https://www.facebook.com/pages/GLP/588103501215839

http://www.glpracing.com/

Edited August 26, 2013 by mania

[ll2]

^

cool Mania, thanks.

will give them a call today.

if it is only 2000 thb, i am there and will also get the header for my slip on for making it a full system! fingers crossed!

[mania]

^

cool Mania, thanks.

will give them a call today.

if it is only 2000 thb, i am there and will also get the header for my slip on for making it a full system! fingers crossed!

Will be interested to hear how it works for you LL

As I said I believe it works on the O2 loop

which some FI Controllers actually block off.

So I am guess it is tricking the ECU into think a different condition exists &

lets the ECU make a change? I am not sure but that is what I think they are doing on that one.

Because I once saw a pic of the splice into the system & it was spliced into the harness leading to the O2 sensor

not the fuel Injectors + it is called O2 Hiper map sensor

But....I see that company that makes it also sells a FI controller too

http://www.glpracing.com/forums/index.php/topic,54.0.html

You may want to ask about both & see

PS: The O2 Hiper Map appears to be their O2map + hiper map meaning it now can switch between

2 maps. Their original had just one map.

http://www.glpracing.com/forums/index.php/topic,42.0.html

But again all via the O2 sensor

Edited August 27, 2013 by mania

[ll2]

i will check all. i think O2 optimizer is just sending a fake signal to ecu like 'hey ecu, i am going lean and i need more fuel"

O2 optimization is a must on new generation budget bikes of honda, same for cbr250r as well.

i see the injector thing too and a photo of a cbr500r O2 hiper installed but no dyno which makes me sad a bit.

i wonder too, will let my staff call them this afternoon.

thanks again for the finding mania, this is cool really.

[mania]

i will check all. i think O2 optimizer is just sending a fake signal to ecu like 'hey ecu, i am going lean and i need more fuel"

O2 optimization is a must on new generation budget bikes of honda, same for cbr250r as well.

i see the injector thing too and a photo of a cbr500r O2 hiper installed but no dyno which makes me sad a bit.

i wonder too, will let my staff call them this afternoon.

thanks again for the finding mania, this is cool really.

In their forums they have Dynos but too small to really be of use

Maybe you can ask them directly for a better copy.

I can see they were done at Dirtshop

[mania]

RSV Racing is always making some nice things

They recently made that nice swingarm for the ninja 250/300

Now I see they have made a nice set of triple clamps for the Honda 500 series CBR,F,X etc. & Super 4's

Also Kawasaki ER6

If someone want to upgrade their forks to something more serious this would be a nice deal at about 11k baht

Looks like they are even stocking fork legs too

But I did not see a price mentioned

Edited August 28, 2013 by mania

[ll2]

mania, you are great man.

i will check this asap.

[thaicbr]

Mania. Any idea what make the forks are... seems cheap at 11k for everything. Wheel. Forks etc.

Sent from my i-mobile i-STYLE Q6

[mania]

Mania. Any idea what make the forks are... seems cheap at 11k for everything. Wheel. Forks etc.

Sent from my i-mobile i-STYLE Q6

Oh no way sorry

11k baht is for the triple clamps only I am sure.

No forks no wheels brakes etc.

That is why I said looks like they are also selling fork legs

Heheh that would be awesome though wouldn't it

Edited August 28, 2013 by mania

[ll2]

yes, it is:)

mania, do you have a link on this?

[mania]

yes, it is:)

mania, do you have a link on this?

LL I am 99.9% sure it is of course just the triple tree for 11k

no way anything more.

As to links

Their website like many Thai web sites is useless.

Most Thai bike businesses do all their business on FaceBook

Here is RSV's

https://www.facebook.com/RSVRACING

[ll2]

haha, it should be perfect to get them all but i wonder if they can fit a upside down forks on it?

[mania]

haha, it should be perfect to get them all but i wonder if they can fit a upside down forks on it?

Sure LL why not? It is done all the time even have seen USD forks on N250's

It is not a big deal just needs the triple clamps to hold legs x sized & also of course should keep geometry

like rake & trail the same unless you seek something specifically different in handling

But that is achieved through the frames head angle & length of forks nothing else

Main question will be does a CBR500 owner want to put this kind of $$ into it?

Here is a CBR500 with the RSV clamps & USD forks on

Edited August 28, 2013 by mania

[ll2]

nice!

double disc setup is also there of course abs is gone.

i will go ask them this weekend.

[Gomyway]

Good find Mania

This looks very good, I only think the wheels are from a Gixxer or maybe the CBR 1000 - look at the 3 spokes and the other swing arm.

Yesterday I went in the city and had a 500 X in front of me with an aftermarket exhaust with nice sonorous sound.

I don't know the make since I couldn't follow the guy with my Hayate, maybe the turbo didn't start

[bramds]

The forks from RSV are 15,000 baht

[ll2]

so 11k for clamps, 15k for fork and how much for clip ons?

i still could not call them, very busy.

[bramds]

so 11k for clamps, 15k for fork and how much for clip ons?

i still could not call them, very busy.

You could have called them in the time you spent on posting here

[ll2]

so 11k for clamps, 15k for fork and how much for clip ons?

i still could not call them, very busy.

You could have called them in the time you spent on posting here

it is not me to call them, it is my staff bramds. we are busy nowadays and telling them to stop work and call somewhere for me about motorcycles?

and do you think it is easy to explain a phone call to a female staff on clamps and upside down forks?

[KRS1]

the word 'fork' may not transliterate well into thaiglish

[thaicbr]

the word 'fork' may not transliterate well into thaiglish

Especially upside down 'fork'. Crazy falang stuff

Sent from my i-mobile i-STYLE Q6

[mania]

The forks from RSV are 15,000 baht

where did you see that price for the forks?

On FB I have seen him say 15k for แผงคอ which translates to "mane" ( of animal ) & บน Which means on top

Which I guessed to be the triple tree

Do you have somewhere to see that fork price or did you call him?

I know they are not Ohlins which cost 85k

but 15k would be very cheap for USD forks

EDIT:

This is what I saw as his latest post ( actually his wife I think as it ends in Ka )

แผงคอ บน-ล่าง+แฮน+น๊อต+ค่าแรงค่ะ 15,000 บาท

So I roughly understand it to mean

mane on top - (minus) lower & handlebar & not? + wages/labor costs? 15,000 baht

heheh beats me in the end if I were interested I would say call them

Edited August 29, 2013 by mania

[mania]

I see they have responded to an English speaker saying

"This price for Top Bridge Steering stem Only .Not included wheel and brake."

Which is still not really clear if that means triple only or triple & forks which I doubt price wise

[bramds]

I see they have responded to an English speaker saying

"This price for Top Bridge Steering stem Only .Not included wheel and brake."

Which is still not really clear if that means triple only or triple & forks which I doubt price wise

stem1

Pronunciation: /stɛm/

Translate stem | into French | into German | into Italian | into Spanish noun

• 1the main body or stalk of a plant or shrub, typically rising above ground but occasionally subterranean.
• the stalk supporting a fruit, flower, or leaf, and attaching it to a larger branch, twig, or stalk.

• 2a long, thin supportive or main section of something

source: http://oxforddictionaries.com/definition/english/stem?q=stem

[mania]

I see they have responded to an English speaker saying

"This price for Top Bridge Steering stem Only .Not included wheel and brake."

Which is still not really clear if that means triple only or triple & forks which I doubt price wise

stem1

Pronunciation: /stɛm/

Translate stem | into French | into German | into Italian | into Spanish noun

• 1the main body or stalk of a plant or shrub, typically rising above ground but occasionally subterranean.

• the stalk supporting a fruit, flower, or leaf, and attaching it to a larger branch, twig, or stalk.

• 2a long, thin supportive or main section of something

source: http://oxforddictionaries.com/definition/english/stem?q=stem

Yes basically as I thought with "mane"

As such I believe he is talking about the triple tree only.

The steering stem being the main point of attachment to the head of the bike.

That aside I just do not see any possibility at all of that machined triple clamp + the forks costing 15k

RSV sells just their rearsets for 3.5-5k

There is way more work in those triple clamps

[bramds]

Maybe it is only the forks, without the triple clamp that cost 15K

Because i bellieve the triple clamp alone is 11k

[mania]

Maybe it is only the forks, without the triple clamp that cost 15K

Because i bellieve the triple clamp alone is 11k

Not sure but I originally saw a 11k price but never again & only 15k since.

So it could be the 11k was premature?

Someone with a 500 should call & see

But even if the forks were 15k that would be some very

questionable forks.

Just buying a decent pair of springs for my stock forks was

4k

Edited August 30, 2013 by mania