Bizumo Exhausts For Versys 2011 Model (Need Advice )

[YipYipYa123]

anyone using one of these pipes below ?

id like to hear from others opinion as im not familiar with this company but prices seems nice ,

do they sound rough and nasty ? or is there any quality issues since they are cheaper than the usual

brands (falling apart etc ? )

http://www.taradplaz...913233812_b.jpg

http://www.taradplaz...913231511_b.jpg

http://www.taradplaz...924230621_b.jpg

http://www.taradplaz...913235143_b.jpg

and another company called CNC have this one :

http://www.taradplaz...091424920_b.jpg

also ,can i use a system from an er6n or a er6F on it ? either a slip on or full system if either will fit

Any other suggestsions welcome also !

Thx all !

[YipYipYa123]

sorry,forgot to add ,needs to have at least the same (or better) ground clearnace than stock can because i ride over dozens of speedbumps every day and have scraped the stock can once or twice so lower wil not work for me ......

found another one from ttga company also inexpensive :

http://www.bigbikemarket.com/component/adsmanager/?page=show_ad&adid=1283

decisons, decisons .........

[VocalNeal]

The Tyga pipe if it is a real Tyga is going to be loud as it is a race pipe. The others as they are local, made for the local market and probably made of very thin tubing are probably also loud.

So any will be OK if you want loud.

Versys has a different swing arm so ER6 systems may not fit.

[Kwasaki]

sorry,forgot to add ,needs to have at least the same (or better) ground clearnace than stock can because i ride over dozens of speedbumps every day and have scraped the stock can once or twice so lower wil not work for me ......

found another one from ttga company also inexpensive :

http://www.bigbikema...ow_ad&adid=1283

decisons, decisons .........

What's wrong with the stock one, me thinks it's pretty & not horid loud.

[TongueThaied]

I am very happy with my Scorpion. The nice thing about it is that it has stainless steel packing instead of glass (that needs repacking every three years or so), and is a lifetime pipe. Great sound. Easy to make louder if you want it louder.

[karlos]

The exhaust in question has several different models, i was looking into buying one myself a while back.

I think they look great and they sounds good too, my only concern is that most of their range consists of Carbon, knowing that the rivets can elongate the holes in most carbon exhausts (Two brothers and my Leo vince underbody) i would try to go for one that has as little carbon on it as possible. I like the one that is full Stainless steel but has a small carbon cap on the end, i think the cap isn't pressurized (like my Leo Vince) and should take a while before you have re-rivet it

The reason I went for the Underbody Leo Vince is because it’s completely under the bike and It’s not going to get damaged should the bike and I head south, Plus Norman (AKA Jonnie) Sorted me out for the deal of the decade!