Jump to content

Recommended Posts

Posted

Anybody had experience with Honda Click bike shaking from the back end?..I had new belt and bearings and front small wheel..It still shakes a little bit when the engine is cold from start in morning..Do i need to change the clutch at the back end also and if so at what price?.

Posted (edited)

Known issue.

Remove the CVT case.

Replace the rollers (weights) (1)

Than disassemble the flywheel clutch and clean the clutch linings (2) and the inside of the flywheel (3) with medium sandpaper. (Important!)

Check the clutch springs for damage. (4)

Clean everything painstakingly with compressed air.

Sorted. wink.png

post-147752-0-92878100-1408434373_thumb.

Edited by retoocs01
  • Like 1
Posted

Known issue.

Remove the CVT case.

Replace the rollers (weights) (1)

Than disassemble the flywheel clutch and clean the clutch linings (2) and the inside of the flywheel (3) with medium sandpaper. (Important!)

Check the clutch springs for damage. (4)

Clean everything painstakingly with compressed air.

Sorted. wink.png

attachicon.gifcvt.JPG

Thanks retoocs01

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...