Jump to content

Recommended Posts

Posted
1 hour ago, miCRoSCoPiCeaRthLinG said:

The cables need a specific kind of termination at either ends compatible with my platform.

What kind?

Posted
47 minutes ago, ChiangMaiLightning2143 said:


What in controlled listening tests 99 percent of reviewers can’t tell from 12 gauge lamp cord wire.

With the extremely high quality you are obviously aiming for, I assume the room the equipment in has been designed / modified to allow for the quality you are looking for?

Posted
7 minutes ago, ChiangMaiLightning2143 said:

I live in a Chiang Mai Condo. It has the acoustic qualities of a concrete box, because it’s a concrete box.

You think Acoustics can't be changed?

Posted

Those Panasonic plugs are unusual but the recessed pins on the backplate look quite standard:

 

6c-82mm-speaker-connectors-made-for-Pana

 

So some ordinary insulated lugs should fit and anyone with a crimping tool could attach them to some suitable cable.

 

And of course anyone with some insulating tape could splice extra cable onto your existing plugs.

  • Like 1
Posted

If you go and take a look at standard "bullet"  type crimps, you will find that the RED colour coded size will fit your Panasonic like a glove, and you can buy a shedfull for a dollar.

 

 

red bullet.jpg

Posted

I don’t know about that.

Those look like proprietary connectors.
The use these on cheaper models for ease of installation as they “click in”and are
Color Coded. I had a cheaper Samsung blue ray that had these. Becomes a problem when changing speaker wire/length. I found a third party supplier that sold them on eBay, they were a hassle to splice because the connectors are
so narrow.

I recommend the OP going with a higher level AV amp that uses standard Banana plugs. Give the Panasonic away.

Posted
12 minutes ago, ChiangMaiLightning2143 said:

Those look like proprietary connectors.

Check the photo I posted the other day, and the photo the OP posted. The plug is specific to Panasonic but the pins on the backplate look entirely normal to me.

Posted
On 8/18/2018 at 11:44 PM, KittenKong said:

Those Panasonic plugs are unusual but the recessed pins on the backplate look quite standard:

 

6c-82mm-speaker-connectors-made-for-Pana

 

So some ordinary insulated lugs should fit and anyone with a crimping tool could attach them to some suitable cable.

 

And of course anyone with some insulating tape could splice extra cable onto your existing plugs.

 

Thank you - that's a great idea. Don't have a crimping tool - but I can carry out the splicing by myself.

 

Should I expect any degradation in quality due to the splicing?

Posted
On 8/28/2018 at 12:48 PM, miCRoSCoPiCeaRthLinG said:

Thank you - that's a great idea. Don't have a crimping tool - but I can carry out the splicing by myself.

Should I expect any degradation in quality due to the splicing? 

I would not expect it to be noticeable at all.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...