I have  CAT fiber with a Zhone ZNID-GPON-2426A-NA router and the internal IP is supposed to be 192.168.1.1 but I can't connect. It works fine but I need to change some port forwarding settings for my DVR

I'm cabled directly to it, ipconfig shows my default gateway as 192.168.1.1. When I try to connect or run the troubleshooter it says the device rejected the connection.

Does anyone have CAT who has logged into their router to set up port forwarding etc. who knows what the internal IP to connect to is or what the trick it?

Thanks

It's possible the webconfig daemon on your router has crashed.

Try power cycling your router (Off, count to 10, On) and try again.

 

You could also try your WAN IP address. Sometimes it will let you in using that from the LAN side.

On 14.9.2017 at 9:34 PM, RichCor said:

You could also try your WAN IP address. Sometimes it will let you in using that from the LAN side.

Or let the router on and go to a friend/public WiFi and try from there.

A good reminder why a safe password should be used.