Jump to content

Car key with chip....need a copy.


mikey88

Recommended Posts

I have an older Yaris and the keys have a chip..

Anywhere in CM where I can get a copy done at reasonable price...?

The key is for my car in Australia...if that makes any difference.

$140 to get one done there..

any help appreciated....

Link to comment
Share on other sites

Check with the key copy places in your local Oz shopping centre. Some cars need to be present to copy the keys. The key cutters have a book listing what cars need to be there and what don't.

If your car doesn't need to be present then the key cutting places in Thai shopping centres can cut and program the key for you. They have the chips and a machine that they drop your old key in plus the new chip and the code get copied. I've had a few keys copied this way. I found they all charge a standard price.

Link to comment
Share on other sites

It would not surprise me. 

I don't have such a key system, but I see that he has "blanks" that are clearly ready for modern technology. This is SE Asia; I would expect that "unlocking" or booting a key to a car would be a piece of piss for them....

Link to comment
Share on other sites

Normally you show an original KeyFob, along with that number and car make and model they can look

up the Key code. I would think they might not have codes for Australia models.

 

However as stated above these Keys are easily hacked with basic devices. No way to test it until you bring it back to Australia? Maybe waste of money.

Link to comment
Share on other sites

I think the guy needs the transmitter in the key assembly! I had a Toyota Wish and I bought my replacement key on Ali Express for $1.28 US each and then had it cut for 30 baht. The key places in Korat wanted 1500-2000 THB.

  1. The transmitter in the key, Toyota wanted 8000 THB for one which was ridiculous. I don't think a key man can duplicate a transmitter.
Edited by tomwct
Link to comment
Share on other sites

Tesco-Lotus Kham Thien, upper floor near the washrooms is a small kiosk with a fellow selling many models of electronic keys.  I bought an extra for my Innova (yes, with transmitter.  The code was copied from the old key).  Cost? 690B

Edited by Rotweiler
Link to comment
Share on other sites

I wanted a spare 'Electronic' key for my Honda.

Memory says B3,000 for the 'Blank' key from Honda. Then I had to take it a shop that would cut.

Location, coming from Chang Puack bus station to the roundabout where there is a shop which cut the key say B100.

Back to Honda dealer and the inserted key into my car did some 'Electronic' thing and I had my spare key.

 

john

Link to comment
Share on other sites

  • 6 years later...

Any recent information, please. My Thai wife just bought a Mazda 3 with one key only. She ALWAYS loses her keys, so it's very important I get a duplicate somehow. Is The Tesco place still there? My Honda Brio key is also falling apart. 

Link to comment
Share on other sites

On 10/14/2017 at 5:35 PM, mikey88 said:

I have an older Yaris and the keys have a chip..

Anywhere in CM where I can get a copy done at reasonable price...?

The key is for my car in Australia...if that makes any difference.

$140 to get one done there..

any help appreciated....

You can easily program the chip yourself. You can search the internet for the specific model on how to do. You’ll first need to get the key cut. I’ve done this many times, it’s easy.

Example:

First, close all doors

Insert master Toyota key in and out of ignition cylinder 4 times. On the 5th time leave the master key in the ignition cylinder

Open and close driver’s side door 6 times

Remove master key from ignition cylinder.

Verify that security light on the information display is solid, indicating that the car successfully entered programming mode

Insert new chip key

Watch security light blinking for about 60 seconds

When security light goes out, your new key is successfully programmed

Remove new key from the ignition cylinder

And finally, verify that your new key is able to deactivate anti-theft system: security indicator light on the information display should disappear when inserting properly programmed key into ignition cylinder

If it didn’t work, repeat the same steps from the beginning
http://www.diy-time.com/automotive/toyota/program-chip-toyota-key-remote-fob/

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Topics

  • Latest posts...

    1. 0

      Thai Govt Officials Gear Up for F1 Race Discussions

    2. 259

      Trump Declares Victory and Promises a "Golden Age" for America

    3. 23

      *How to find* farang computer doctor for Macintosh?

    4. 7

      Thailand Live Monday 11 November 2024

    5. 0

      Tak Bai Justice Failure Hits Pheu Thai Party Hardest, Poll Shows

    6. 0

      Scottish Man Extradited from Thailand Jailed for Sexually Abusing Young Girls

    7. 7

      Thailand Live Monday 11 November 2024

  • Popular in The Pub


×
×
  • Create New...