Jump to content

Why the world's biggest electric vehicle NEVER needs charging!!


Recommended Posts

Unfortunately, this guy came to the wrong interpretation of what is actually happening with this vehicle. 

 

In fact, this vehicle is using the potential energy of each payload, which is then converted into thermal energy from friction at the brake pads, and then converts this thermal energy to electric current, which is then stored in large on-board batteries. 

 

The 2nd Law of Thermodynamics has not been broken in this case. 

 

Some guys believe in perpetual motion machines, but I do not. 

 

But how efficient is the recovery of the initial potential energy? 

 

Well, you can derive everything from one equation, F=ma, plus the gravitational constant big G. 

 

Or, just ask big GG... 

 

 

  • Like 1
  • Sad 1
  • Haha 1
Link to comment
Share on other sites

13 minutes ago, Crossy said:

This means that the eDumper can actually generate more energy than it consumes on a daily basis, and it never needs to be plugged in.

This only makes sense if the vehicle only travels downhill.

 

Otherwise, how does it get back up to the top of the hill? A Star Trek transporter?

 

Note, Crossy, I realise that is an AI quote, not yours. 

Edited by macahoom
  • Confused 1
Link to comment
Share on other sites

11 minutes ago, Crossy said:

 

The loads of rocks DO only travel downhill, the truck goes back up empty.

Hmm… fair point. Interesting!

 

Even so, the weight of the rocks, the efficiency of the truck, the gradient of the hill etc. would all be a factor.

  • Like 1
Link to comment
Share on other sites

25 minutes ago, Crossy said:

 

The diagram in the video certainly implies that, it seems an odd way to do the job.

 

Your favourite AI (Bard) says otherwise:-

 

 

I had assumed they were using thermoelectric generators on each wheel to convert braking heat directly into electric current to charge batteries. Apparently not. 

 

Maybe I was hallucinating this time, and not Bard. 

 

Link to comment
Share on other sites

Just now, macahoom said:

Even so, the weight of the rocks, the efficiency of the truck, the gradient of the hill etc. would all be a factor.

 

The energy recovered from 150tons (rocks and truck) going downhill is evidently more than sufficient to take 45tons (empty truck) back up. Only 30% efficiency is needed.

  • Like 1
Link to comment
Share on other sites

Just now, GammaGlobulin said:

I had assumed they were using thermoelectric generators on each wheel to convert braking heat directly into electric current to charge batteries. Apparently not. 

 

Maybe I was hallucinating this time, and not Bard. 

 

That's a really poor diagram to be honest, the brakes aren't involved at all so why show them.

Link to comment
Share on other sites

3 hours ago, GammaGlobulin said:

 ... In fact, this vehicle is using the potential energy of each payload, which is then converted into thermal energy from friction at the brake pads, and then converts this thermal energy to electric current, which is then stored in large on-board batteries. ...

 

Regenerative braking does not convert thermal energy into electricity.

 

Whilst driving a vehicle with a regenerative braking system, the electric motor draws power from the battery to turn the wheels, creating the kinetic energy it needs to move. When the brakes are applied however, the process switches into reverse mode. Now the kinetic energy that was initially used to propel the vehicle, makes the wheels rotate the electric motor, turning it into a type of generator. Instead of consuming electricity, the motor/generator starts producing it, using the vehicle’s kinetic energy. The electrical energy is then stored in a high voltage battery, where it is used again to help propel the vehicle. Since regenerative braking converts the vehicle’s kinetic energy into electricity, it is also able to slow it too, in the same way hydraulics brake do with friction.

  • Like 2
Link to comment
Share on other sites

8 hours ago, GammaGlobulin said:

Unfortunately, this guy came to the wrong interpretation of what is actually happening with this vehicle. 

 

In fact, this vehicle is using the potential energy of each payload, which is then converted into thermal energy from friction at the brake pads, and then converts this thermal energy to electric current, which is then stored in large on-board batteries. 

 

The 2nd Law of Thermodynamics has not been broken in this case. 

 

Some guys believe in perpetual motion machines, but I do not. 

 

But how efficient is the recovery of the initial potential energy? 

 

Well, you can derive everything from one equation, F=ma, plus the gravitational constant big G. 

 

Or, just ask big GG... 

 

 

No, as mentioned your understanding of the mechanism was wrong as it is converting kinetic energy directly into electricity just like about every battery electric car. You don't need to involve F=ma. All you need is the ratio of the weights of both full and empty truck plus the energy round trip efficiency of the electric motor and battery between recuperative braking and climbing. If say the efficiency is 50% and the weight difference was more than 2:1 then the thing wont need charging.

 

44 minutes ago, GammaGlobulin said:

I had assumed they were using thermoelectric generators on each wheel to convert braking heat directly into electric current to charge batteries. Apparently not. 

 

Maybe I was hallucinating this time, and not Bard. 

 

Thermoelectric generators have an efficiency of usually less than 10%. How would that work? Anyways, no need if you can convert the kinetic energy directly into electricity without jumping through hoops.

Link to comment
Share on other sites

9 minutes ago, Muhendis said:

It's a You Tube vid. which for me = 90% BS.*

However convincing the argument may seem, it matters not.............it's still You Tube.

* The other 10% is brilliant but can be hard to find.

 

Here's an actual article. It does point out various inconsistencies between the sources, but whatever, the rocks going down generate more than enough energy to take the empty truck back up.

 

https://insideevs.com/news/361095/edumper-largest-ev-world/

 

And one of the project partners https://lithiumsystem.ch/projects/edumper/?lang=en

 

  • Thanks 1
Link to comment
Share on other sites

1 hour ago, Crossy said:

 

Here's an actual article. It does point out various inconsistencies between the sources, but whatever, the rocks going down generate more than enough energy to take the empty truck back up.

 

https://insideevs.com/news/361095/edumper-largest-ev-world/

 

And one of the project partners https://lithiumsystem.ch/projects/edumper/?lang=en

 

That is one scenario which will undoubtedly work providing the mountain quarry is high enough to allow time for regen. braking to do it's stuff.

 

What about another scenario where the quarry is lower than the road which is relatively flat?

 

Not very versatile but good for elevated quarries in Switzerland.

  • Like 2
Link to comment
Share on other sites

This comes up every few years. I remember some guy trying to get me to invest in their fuel technology startup - trucks running on water - he was really hyped about it, even showed me a youtube video, but of course, I'm just as likely to endorse an independent financial advisor in a Nana bar as I am to celebrate a perpetual energy discovery and the endless riches that await..

 

This might work in the niche scenario pointed out and that's mildly interesting, but it isn't going to change anything for the rest of the world, clickbait videos

Edited by circa02
Link to comment
Share on other sites

8 hours ago, eisfeld said:

Thermoelectric generators have an efficiency of usually less than 10%. How would that work? Anyways, no need if you can convert the kinetic energy directly into electricity without jumping through hoops.

As I have already clearly stated, not only must I have been hallucinating this morning, but, in addition, I was clearly out of my gourd for even considering such a solution as solid-state energy conversion from heat to electric current might be possible, even with state-of-the-art technology which has not even been dreamed up yet, sufficient to power anything more than a low-wattage light bulb.

 

So far, it seems that this is the best we can do:

https://pubs.acs.org/doi/10.1021/acs.nanolett.0c00227

 

We have been using TEG for decades on space probes, such as Cassini, but, as you say...

Just a few watts of power is possible.

 

So, was this the stupidest thing I have written on TV, to date?

Absolutely.

 

I just hope that it will never happen again.

But, I hold out no great expectations that it will not.

 

 

 

 

 

 

  • Like 1
Link to comment
Share on other sites

10 hours ago, Bandersnatch said:

 

Incorrect, the break pads are not involved in the power generation and neither is thermal energy.

 

When I drive my electric car, I don’t touch my breaks, I just lift off the throttle and the same electric motor that was propelling the car forward now acts like a dynamo to charge the battery.

 

Potential energy is involved as it powers the motors in reverse much like pumped hydro. 

Brakes..............????

Link to comment
Share on other sites

10 hours ago, Crossy said:

 

The loads of rocks DO only travel downhill, the truck goes back up empty.

 

You need to watch the video ???? 

OK, but there's a case to say that's not efficient.

 

Do you think the clever supply chan operators have their vehicles do retrun trip with no load, no income?

 

No, they plan carefully (plenty of software packages to do the planning so that the vehicle produces income in both directions.

 

Is the giant truck the same? Well a some clever thinking might well produce some way the return trip produces some income. Myabe focused on big items which have low weight?

 

I'm aware of a very productive supply chain operator in Singapore, they supply everything to all McDonalds, all KFC stores and other food chains. on their return journeys they carry finished food products (in excess of daily walk-in sales needs) from many food manufacturers (incl/. McD, KFC and more). Many of these places use their ovens during less busy periods  to make bakery products. All well planned for total efficiency and best production of income. 

  • Confused 1
Link to comment
Share on other sites

37 minutes ago, Crossy said:

 

Indeed, but in this case the initial energy input was from tectonic action getting the rocks up there in the first place ???? 

 

Has to be a first!

Nice observation but where did that initial energy come from?

And is that energy being released when the rocks are rolled down the hill in order to charge batteries?

And if the world was flat, what then?

  • Confused 2
Link to comment
Share on other sites

1 hour ago, Crossy said:

 

There are some who would disagree :whistling:

 

Note: - I didn't say I was one of the "some" ???? 

I think you've got a double-negative going on here...

 

Anyway, for my illogical statement, I have put myself in the stocks.

I will remain in this condition as long as I think is necessary until I am satisfied that I have learned a lesson...

 

the stocks - Online Discount Shop for Electronics, Apparel, Toys, Books,  Games, Computers, Shoes, Jewelry, Watches, Baby Products, Sports &  Outdoors, Office Products, Bed & Bath, Furniture, Tools, Hardware,  Automotive Parts, Accessories

 

 

  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...