Morning all. I hope someone out there might be able to offer some advice. I've bought a pair of lights for my Aerox. Took to my local, provincial Yammy dealer to have wired up. After several hours they gave up & said not possible. If anyone can offer some advice or possibly suggest where I might try to see if the lights can be wired to the Aerox.

Thanks in advance.

so, a well trained professional installer there, could not work with this?

 

for the +Supply... why not piggyback off the Highbeam wire leading up to the original Highbeam unit? 

 - they are only 10watts each after all.

 - This would save you having to touch the Switch each and every time you want to flood the road.

I assume you'd use these all the time as highbeam? 

The switch then becomes a Pre-Select/Inhibitor for the rare times you don't want them

Thanks for that. You have any idea if any significance of the A marking on the switch, circled with the arrow ?    

22 minutes ago, malt25 said:

Thanks for that. You have any idea if any significance of the A marking on the switch, circled with the arrow ?    

That is the Stop/Start system... works just like in modern cars. Stop/Start activated when Switch set to (A) 

See pages 34 to 36 of Aerox Operating Manual

Thanks again.