Skip to content
View in the app

A better way to browse. Learn more.

Thailand News and Discussion Forum | ASEANNOW

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What Male Terminals to Use?

Featured Replies

Just bought a new AVR, no power input and output terminals supplied.

What male terminals fit  this AVR?

20240802_061847.jpg

20240802_061754.jpg

  • Popular Post

If you take that cover off, does it reveal that those are actually crimp-lugs on bolted terminals??

 

You will probably have to feed the wire through the hole before putting on the crimp.

 

"I don't want to know why you can't. I want to know how you can!"

  • Author
10 minutes ago, Crossy said:

If you take that cover off, does it reveal that those are actually crimp-lugs on bolted terminals??

 

You will probably have to feed the wire through the hole before putting on the crimp.

 

OK thanks again. Will have to wait till I get home as getting son's car fixed at Mukdahan. Bloody kids. 🙂

  • Author

@bluejets Thanks very much. 

Have to investigate a bit further as seems strange (to me) if you have to take the cover off to connect the power cables. Probably has those stickers over the cover screws as well.

Hope you are going good with that other problem and if you get here to Thailand send me a PM and I'll try and pop in and say hello. 🙂

41 minutes ago, Crossy said:

Just remove the two screws on the gland plate.

What can you see inside?

 

 

Its exactly what you are thinking, allows the screw terminals to be pulled out.

 

Screenshot2024-08-03160958.jpg.b5cefdfb05e661a391bd28da146d390e.jpg

  • Author

I took the cover off to see the neutral strapping.

Had trouble connecting my large power cables (no trouble with the Lioa as different connectors).

All going but cables not cleaned up, have to make up some pigtails to get it neater.

20240806_151402.thumb.jpg.ff34afc0fd84d35ed63c76bc22fcfc13.jpg20240802_061847.thumb.jpg.6e7046792fb184d3a0cb4b2eae534058.jpgScreenshot_20240804_080737_Brave.thumb.jpg.0a1e2a365e3ca9a7f5348e24a45795d3.jpg20240805_123354.thumb.jpg.56a4e74b4b9f1be42d8adac75c2b5a0f.jpg20240805_123434.thumb.jpg.2390d263b8c8e00cb4fdd65b7fa37d9f.jpg20240805_123444.thumb.jpg.d78ef84ce8d27cab316e5392df0d72d5.jpg20240805_123536.thumb.jpg.9e53f7e014c9d1ecbbbd61b28e4ca6a4.jpg20240805_123543.thumb.jpg.b2d7b7cef2d87a2c59d57f34c1bd5356.jpg20240805_123543.thumb.jpg.b2d7b7cef2d87a2c59d57f34c1bd5356.jpg

20240805_175503.jpg

I wonder what happens if you actually  do "tear down this paper"  ?

as warned not to in one of the above photos.

  • Author
5 minutes ago, johng said:

I wonder what happens if you actually  do "tear down this paper"  ?

as warned not to in one of the above photos.

Nothing will happen, but it's a good warning not to terminate the neutral and active wires onto the wrong terminals, because then there will be a lot of excitement.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.