Skip to content
View in the app

A better way to browse. Learn more.

Thailand News and Discussion Forum | ASEANNOW

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Laptop screen rubber seal replacement

Featured Replies

So, as the title suggests I have a laptop ( ASUS UX305CA ) and the seal around the screen has disintegrated.

It is an older model, 10 years, but is a lovely slimline model which I bought upon retirement and has served me well, albeit has had little use. Am thinking to donate to one of my step kids ( 21 and 18 ) who will no doubt make better use of it than i did.

Have replaced the battery this week and now would like to get the screen seal sorted.

Does anyone know of any place, preferably in Northern Bangkok, that is reputable and reliable enough to tackle this, any particular store in MBK or the like ?

No doubt a simple job for many of the multitude of vendors there but i would prefer a recommendation if possible.

TIA

  • Author

So, am I vastly overestimating the resourcefulness of repair shops here ?

Would they be able to use a generic 13.3” seal or risk damaging beyond repair ?

Will it require an official ASUS spare part and ASUS Service Center ( which would probably be expensive and not worthwhile for a 10 year old laptop ) ?

Any suggestions to salvage this laptop and prevent the seal around the screen from disintegrating further ??

IMG_8420.jpeg

IMG_8419.jpeg

IMG_8418.jpeg

The screen is difficult to clean now as the breaking down of the seal leaves sticky rubber substance residue, I probably caused this issue by trying to clean the screen years ago with an overly aggressive cleaning solution.

Anyway, any suggestions ( other than “ bin it “ ) welcome.

This happens a lot to rubber and plastics that are left in 'sealed' environments like a small draw or storage box especially here in Thailand.

I would remove the seal completely clean up as much as possible with isopropyl alcohol

and if the screen is not loose then just leave it as is..or you might try some silicone sealant

if it is..

Have you given a good sniff of the screen does it smell of vinegar ??

  • Author
8 minutes ago, johng said:

This happens a lot to rubber and plastics that are left in 'sealed' environments like a small draw or storage box especially here in Thailand.

I would remove the seal completely clean up as much as possible with isopropyl alcohol

and if the screen is not loose then just leave it as is..or you might try some silicone sealant

if it is..

Have you given a good sniff of the screen does it smell of vinegar ??

Yeah, it has been left for a long time unused, I returned my company laptop when i retired and bought this one to replace it, handy for documentation and personal information/photos etc but not used on a daily basis as my other one was.

Have taken to putting a small cloth over the keyboard to prevent the screen seal from sticking to the base when closed and further breaking it down which helps.

No sign of any vinegar smell, suspect it was some product i used or just leaving it closed for extended periods.

Not sure how the screen is held in place but don’t fancy removing the seal completely ( without a replacement ) as am pretty sure it will fall apart completely.

Have considered silicone, have plenty of experience in my work life and will probably go this route eventually, maybe a test on a small area first. Would need to remove some of the existing cracked seal to make a half decent job of it though.

5 hours ago, Andrew Dwyer said:

So, as the title suggests I have a laptop ( ASUS UX305CA ) and the seal around the screen has disintegrated.

It is an older model, 10 years, but is a lovely slimline model which I bought upon retirement and has served me well, albeit has had little use. Am thinking to donate to one of my step kids ( 21 and 18 ) who will no doubt make better use of it than i did.

Have replaced the battery this week and now would like to get the screen seal sorted.

Does anyone know of any place, preferably in Northern Bangkok, that is reputable and reliable enough to tackle this, any particular store in MBK or the like ?

No doubt a simple job for many of the multitude of vendors there but i would prefer a recommendation if possible.

TIA

Are you sure of the model number?

It's not possible to identify a rubber surround on that model.

https://www.pcmag.com/reviews/asus-zenbook-ux305ca

  • Author
4 minutes ago, IsmeUno said:

Are you sure of the model number?

It's not possible to identify a rubber surround on that model.

https://www.pcmag.com/reviews/asus-zenbook-ux305ca

Yup that’s the one, it is a thing of beauty.

A small seal ( not sure of the exact material but it is definitely rubbery ) between the screen and the lid as shown in the above photos.

Have no idea how far it protrudes under the screen and cannot find any information about it as a spare part, maybe it only comes with the screen ?

Anyway, have already given up on finding a replacement, either original or generic, but wondered if anyone had resolved a similar deteriorated seal problem at any of the numerous IT shops in those large malls in North Bangkok ( Fortune Town, Pantip Plaza, MBK etc )

  • Author

So what is unusual about this laptop is the black border with the ASUS logo and camera is all part of the screen.

IMG_8432.jpeg

There is a 2 mm ( ? ) gap around the top and 2 sides and slightly larger at the bottom where it meets the hinge.

You can see where the rubber seal has cracked and fallen out in this photo.

IMG_8440.jpeg

I watched many YouTube videos about ASUS screen replacement and all ( even ones with the same UX305CA number ) showed a frame holding the screen in place .

All screens had square corners, mine has rounded corners and that is what makes it unique. It is a touch screen so wonder if that is why is different to the rest.

I picked out a piece of the cracked “ seal “ and it appears to have a profile, see photo of it stood upright.

IMG_8439.jpeg

IMG_8439.jpeg

So am assuming it has a rubber seal round the screen sealing the gap between screen and lid.

Will continue to search for this “ seal “ or indeed the touchscreen to see if a replacement “ seal “ exists.

  • Author
52 minutes ago, Andrew Dwyer said:

So what is unusual about this laptop is the black border with the ASUS logo and camera is all part of the screen.

IMG_8432.jpeg

There is a 2 mm ( ? ) gap around the top and 2 sides and slightly larger at the bottom where it meets the hinge.

You can see where the rubber seal has cracked and fallen out in this photo.

IMG_8440.jpeg

I watched many YouTube videos about ASUS screen replacement and all ( even ones with the same UX305CA number ) showed a frame holding the screen in place .

All screens had square corners, mine has rounded corners and that is what makes it unique. It is a touch screen so wonder if that is why is different to the rest.

I picked out a piece of the cracked “ seal “ and it appears to have a profile, see photo of it stood upright.

IMG_8439.jpeg

IMG_8439.jpeg

So am assuming it has a rubber seal round the screen sealing the gap between screen and lid.

Will continue to search for this “ seal “ or indeed the touchscreen to see if a replacement “ seal “ exists.

So, to correct myself, the 13.3” LCD screen sits inside the black bezel and behind some “ touch “ glass enabling the appearance of one piece.

IMG_8443.jpeg

The elusive rubber seal ( of which i seek ! ) prevents moisture from entering behind and between the glass panel and screen itself .

A somewhat unusual design but at the time was competing with MacBook Air 13 and Dell XPS 13 to produce the thinnest 13” laptop, which it did for a brief period !

Before spending money replacing any seals, would it not be better to just use it as is?

How much is that very old laptop worth, anyway? Maybe USD50.00.....perhaps.

image.png

What would it be good for, anyway?

Will this thing even run Windows, or is it far too slow.

I have a laptop, an ACER, with an m3 Intel CPU and touchscreen functionality. It's SUPER SLOW.

I use it once a month to connect to my scanners and scan my electric bill.

Otherwise, it just sits there waiting for the next month.

What to use it for?

Maybe you could use it as a learning tool.

You could install Linux on the computer, and then use the terminal to have fun learning various commands?

My laptop of similar age is not good for much of anything, since it is very under-powered for most OSes...

Someday, Canon will support Linux Desktop, and port their scanning software to Linux.

When this happens, I will no longer have any use for this laptop computer.

The world has changed a bit since 2014.

  • Author
5 minutes ago, GammaGlobulin said:

How much is that very old laptop worth, anyway? Maybe USD50.00.....perhaps.

According to your info $50 to $150 USD ?

6 minutes ago, GammaGlobulin said:

Will this thing even run Windows, or is it far too slow.

It runs Windows 10 very comfortably, is not eligible for Windows 11 upgrade but i understand there are ways around that. Not necessary to install Linux.

10 minutes ago, GammaGlobulin said:

The world has changed a bit since 2014.

What happened in 2014 ?

11 minutes ago, GammaGlobulin said:

What to use it for?

As I already stated will donate to my step kids who are at Uni and Vocational College, am pretty sure they will make use of it, I will upgrade the ssd beforehand and have already fit a new battery this week as i already said, did you read the op ?.

The idea of replacing the seal is to improve it aesthetically, otherwise it is perfect.

13 minutes ago, Andrew Dwyer said:

What happened in 2014 ?

That was the year I purchased a laptop very similar to the laptop you are now using.

It's very slow.

This is due to problems like what some often call "software bloat".

You stated in your original post that you purchased your laptop 10 years ago.

However, the CPU was first released around 2015, if I am not mistaken, and so about 11 years old.

image.png

11 years ago, this was a nice machine.

At that time, Windows 10 had just been released.

As you say, you have upgraded to an SSD, which will help things a bit.

However, if still slow, then maybe Linux might help. Or, just use the laptop as a learning platform if the student is doing Software Engineering studies, or something.

image.png

The ACER laptop I purchased in 2015 is way too slow for anything but use as a way to connect to my scanners.

Yet, still, the responsiveness using Windows 10 is far too slow.

Buying a new computer, these days, is not a good option, due to recent significant artificial price increases.

These days, probably better to buy a used machine, or repair an existing computer, if the CPU is still capable enough.

You might check the benchmarks for the actual CPU installed in the computer.

Which CPU is actually installed?

image.png

https://www.cpubenchmark.net/cpu.php?cpu=Intel+Core+m3-6Y30+%40+0.90GHz&id=2631

On 2/26/2026 at 12:16 PM, Andrew Dwyer said:

Anyway, any suggestions ( other than “ bin it “ ) welcome.

Here is a suggestion for you:

(And I would never suggest binning the computer.)

Any laptop that has been sitting around, or used, for 10 years can become clogged with dirt, dust, hair, etc...

Your laptop, as you know, employs a passive cooling system.

When dust and dirt collects inside the computer, this can degrade cooling performance.

When the cooling performance is degraded, then this can cause the CPU to run slower than it should, if any overheating occurs.

Therefore, at least in my case, I had been planning to have a tech at one of the local shops open the laptop and clean, if necessary.

Also, one of the first things I would do when the case was opened would be to CLEAN the CPU, and add new thermal paste.

Thermal paste can deteriorate over time, and 10 years is a LOOOONG TIME......

CPUs love to stay cool, as you know.

This can restore higher CPU speeds on a computer for which the thermal paste requires replacing.

Again, I would never bin a computer such as this.

These older machines are good for providing a learning platform, such as for new users who wish to transition away from Windows, Windows 11.

Also, very good for students who might be getting into and learning computer programming (AKA "coding", these days).

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.