Hi,

anybody know how to setup a psi sx box to receive the aussie network on intelsat 8 at 169e

have two 1.5 dishes feeding into a 2 into t disq splitter but dont know the parameters, when i select the sat all data is at zero

but works ok on the other dish on thai 5c

this was working but local installer used 1 inch screws to mount the clamps into the facia , we had a small wind and it fell down - surprise

I hope one if those dishes is for C-band?

You do seem to be within the footprint for Intelsat 8

on the Pacific beam

Looks like you will need a decoder card as well

http://www.lyngsat.com/tvchannels/sa/ART-Australia.html