Jump to content

Recommended Posts

Posted

Last year I posted a query about this, but was unable to provide a picture.

There are actually 2 boxes, the green Select Light and a grey box with a big red button.

So what do you experts reckon?post-56220-0-23624400-1330858662_thumb.j

Posted

The upper unit is an RCBO, "safe-t cut" type.

The bottom left appears to be a standard RCBO. The one on the right appears to be a standard MCB.

Posted

As Electau notes, there is certainly RCD protection.

Next task, see what each breaker controls so you can determine which circuits are actually protected.

Oh, and press the 'Test' buttons to check the units are actually working.

Posted

Thanks for the replies.

In the original set up, the lower box was wired to the Green box above it, and the 10 amp circuit breaker on the lower right was the sole circuit breaker to the entire house.

After I attacked it, there are now seperate breakers for plugs and lights, and if I remember correctly about 8 breakers in total. I also discarded the grey box, as it didn't seem necessary.

Yes, the test button works on the Green box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...