OneMoreFarang Posted December 30, 2020 Share Posted December 30, 2020 I want to buy some electric power tools. They should have good quality and service in Thailand. I checked a couple of websites of brands like Bosch, DeWalt, Makita and it seems all of them have just a small part of the products in Thailand compared to the USA or Europe. Which brands do you use and do you have any experience with the service in Thailand? In the moment this is a general question not specific to one tool. I think also about battery powered tools and for them it makes a lot of sense to have everything from the same brand with the same battery packs. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 30, 2020 Share Posted December 30, 2020 I have Festool, Makita and Pumpkin. The only tools that have needed service is 1 of my many Festools it was a sander. It took a little time as a part had to be imported. The delay was not long. 1 Link to comment Share on other sites More sharing options...
ThailandRyan Posted December 30, 2020 Share Posted December 30, 2020 I have several Makita cordless drills, a Dewalt ratchet set, and several Innco Pliers and adjustable wrenches. All work fine. Purchased through HomePro 1 Link to comment Share on other sites More sharing options...
bankruatsteve Posted December 30, 2020 Share Posted December 30, 2020 I have several tools from the Maktec (Makita) brand and very happy with long standing service. I see recently that the Maktec brand will be discontinued for "MK" or something like that. Same as Makita on the inside but not so sturdy on the shell. 1 Link to comment Share on other sites More sharing options...
Thomas J Posted December 30, 2020 Share Posted December 30, 2020 Of the two I would stick with Makita. Dewalt use to be top but its quality has gone down in recent years particularly its Lithium Ion batteries. Bosch is also a very good product. I don't know about the local brands like Pumpkin, or Solo. I can tell you to stay away from any of the products marketing as King Kong. They are junk. 2 Link to comment Share on other sites More sharing options...
Kwasaki Posted December 30, 2020 Share Posted December 30, 2020 2 hours ago, OneMoreFarang said: Which brands do you use The cheapest from Global house I'm not going into business. ???? Link to comment Share on other sites More sharing options...
DrJack54 Posted December 30, 2020 Share Posted December 30, 2020 OP, you need to outline what you plan to use tools. My guess is not trade use. Also most hand tools eg cordless drills etc do not require service. The main item with limited life span is batteries. Even that is more applicable to tradesmen using them all day every. Any air tools such as nail guns either air powered from compressor or gas fired guns such as Paslode require maintenance and service. Don't put big money into hobby. The generic throw away power tools are fine for moderate use. 1 Link to comment Share on other sites More sharing options...
stubuzz Posted December 30, 2020 Share Posted December 30, 2020 3 hours ago, sometimewoodworker said: I have Festool, Makita and Pumpkin. How would you rate the Pumpkin stuff? Link to comment Share on other sites More sharing options...
Yellowtail Posted December 31, 2020 Share Posted December 31, 2020 Battery powered tools are great as far as they go, but for most of what you are going to do, with the exception of a good drill-driver, AC tools will be cheaper, lighter and faster. I have Makita, Bosch, Stanley, Ryobi, Pumpkin and they have all been good. It's nice if you can actually listen to the tools run before you buy them 1 Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 31, 2020 Share Posted December 31, 2020 11 hours ago, stubuzz said: How would you rate the Pumpkin stuff? It is not the lightest and I have no idea on its lifetime used heavily, but the SDS drill I have is as good as any other I’ve used so for my use which is occasional it’s value for money, FWIW I only just found out it has a highly unusual reverse. 1 hour ago, Yellowtail said: Battery powered tools are great as far as they go, but for most of what you are going to do, with the exception of a good drill-driver, AC tools will be cheaper, lighter and faster. Agreed on most points except that there is no corded impact driver that is half as good as the good battery ones, in fact the only corded impact is half the power of the battery one I have. 1 Link to comment Share on other sites More sharing options...
Dagfinnur Traustason Posted December 31, 2020 Share Posted December 31, 2020 (edited) 16 hours ago, OneMoreFarang said: I want to buy some electric power tools. They should have good quality and service in Thailand. I checked a couple of websites of brands like Bosch, DeWalt, Makita and it seems all of them have just a small part of the products in Thailand compared to the USA or Europe. Which brands do you use and do you have any experience with the service in Thailand? In the moment this is a general question not specific to one tool. I think also about battery powered tools and for them it makes a lot of sense to have everything from the same brand with the same battery packs. I would go with Maktec, which is a low price brand made on license from Makita. The advantage is that you will find a good selection of tools, high quality as well as a great price. Can´t ask for much more, right? New Year came a couple of hours early this year. ???? https://www.powertoolsthailand.com/category/3071/693/maktec Edited December 31, 2020 by Dagfinnur Traustason 1 Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 31, 2020 Share Posted December 31, 2020 (edited) 24 minutes ago, Dagfinnur Traustason said: I would go with Maktec, which is a low price brand made on license from Makita I forgot that I have a Maktec router that is good a cheap router as any, though my Festool OF 1400 is an excellent top end one and worth the difference FWIW I actually have 5 routers, all different makes, including a 50 year old ELU. Edited December 31, 2020 by sometimewoodworker 1 Link to comment Share on other sites More sharing options...
OneMoreFarang Posted December 31, 2020 Author Share Posted December 31, 2020 Thanks for all your advice. I will look at all your links and brands to get an overview and compare what's available in Thailand. Enjoy the rest of the year (as much as you can) and I wish you all a Happy New Year 2021. 1 Link to comment Share on other sites More sharing options...
mogandave Posted December 31, 2020 Share Posted December 31, 2020 2 hours ago, sometimewoodworker said: It is not the lightest and I have no idea on its lifetime used heavily, but the SDS drill I have is as good as any other I’ve used so for my use which is occasional it’s value for money, FWIW I only just found out it has a highly unusual reverse. Agreed on most points except that there is no corded impact driver that is half as good as the good battery ones, in fact the only corded impact is half the power of the battery one I have. What do you use an impact driver for? My impacts are air, but haven’t used them for years. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 31, 2020 Share Posted December 31, 2020 (edited) 43 minutes ago, mogandave said: What do you use an impact driver for? My impacts are air, but haven’t used them for years. The battery one, a Makita DTD145 gets mostly used for running 3” x 12 screws into shark grip plugs for mounting french cleats that support quite heavy items in my workshop. It is a beast and is quite capable of torquing the heads of the No.12 screws DAMHIKT ???? nothing else I’ve got is capable of running those screws in, it was bought for that job. I also run concrete screws and screws into the very dense cheap wood I use for rough frames. It is also very capable as a general screw driver and for self drilling roofing screws. I also have an air impact that gets very little use, that if asked I would probably sell, something I almost never do with tools. Edited December 31, 2020 by sometimewoodworker Link to comment Share on other sites More sharing options...
OneMoreFarang Posted December 31, 2020 Author Share Posted December 31, 2020 4 hours ago, sometimewoodworker said: The battery one, a Makita DTD145 gets mostly used for running 3” x 12 screws into shark grip plugs for mounting french cleats that support quite heavy items in my workshop. It is a beast and is quite capable of torquing the heads of the No.12 screws DAMHIKT ???? nothing else I’ve got is capable of running those screws in, it was bought for that job. I also run concrete screws and screws into the very dense cheap wood I use for rough frames. It is also very capable as a general screw driver and for self drilling roofing screws. I also have an air impact that gets very little use, that if asked I would probably sell, something I almost never do with tools. I have to admit I had no idea about "french cleats". I just looked it up and I found this one. That looks interesting. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 31, 2020 Share Posted December 31, 2020 5 hours ago, OneMoreFarang said: I have to admit I had no idea about "french cleats". I just looked it up and I found this one. That looks interesting. That one is just a fancy tool board, not bad but a little restrictive. Mine has fewer rows but is much longer. I also have some on the sides of cabinets and my workbench. It’s also the mounting method for some wall cabinets. 2 Link to comment Share on other sites More sharing options...
liddelljohn Posted December 31, 2020 Share Posted December 31, 2020 In Thailand I have Hyundai 1/2 impact tool, Hyundai angle grinder , bosch heavy drill ,dewalt cordless , all from Thai Watsadu 1 Link to comment Share on other sites More sharing options...
sometimewoodworker Posted January 2, 2021 Share Posted January 2, 2021 On 12/30/2020 at 8:49 PM, DrJack54 said: Also most hand tools eg cordless drills etc do not require service. The main item with limited life span is batteries. Even that is more applicable to tradesmen using them all day every. Not really. I have a very nice, expensive, drill/driver (about 5 years old) and the battery life has dropped substantially, so budget on replacing batteries when you look at the tool. Conversely I still have my first Black&Decker drill that’s about 50 years old the only thing it has had is a replacement power cable that is about 3 times longer than the original. 1 Link to comment Share on other sites More sharing options...
Popular Post sometimewoodworker Posted January 2, 2021 Popular Post Share Posted January 2, 2021 On 12/31/2020 at 5:30 PM, OneMoreFarang said: I have to admit I had no idea about "french cleats". I just looked it up and I found this one. That looks interesting. A few more pictures of french cleats in action use and making Being made on a Sysport Holding up a set of cubbyholes Some of the wall storage tool holders Ready use wood storage This is not comprehensive at all I have quite a lot more places where they are in use. An example is a wall cabinet I made as a test piece about 10 years ago, it was in our old kitchen, talking it off the wall and putting it up in my workshop was extremely simple and fast as it was hung on a french cleat, getting it perfectly level was also trivial as I only had to level the cleat on the wall then the cabinet was automatically level, I have also allowed for sideways movement. 3 1 Link to comment Share on other sites More sharing options...
Popular Post Crossy Posted January 2, 2021 Popular Post Share Posted January 2, 2021 On 12/31/2020 at 11:51 AM, mogandave said: What do you use an impact driver for? My impacts are air, but haven’t used them for years. Ours (a baby DeWalt DCF815) gets used for putting in/removing pretty much anything with a thread. The huge advantage they have is there's very little torque on the user's wrist even when driving the coach screws holding our patio table together. Important as one ages and body parts weaken. Once you've used a small battery one you'll never go back to a regular drill-driver. 4 Link to comment Share on other sites More sharing options...
cucme Posted January 3, 2021 Share Posted January 3, 2021 Bosch has a great selection on battery powered tools and are very good, however the batteries are not the same for all of them. Check Makita if you want to spend money, not bad at all. I made very good experiences with Stanley and they are quite affordable. They do repairs in Thailand. Keep your hands off chinese <deleted>! Link to comment Share on other sites More sharing options...
Our Man in the Tropics Posted January 3, 2021 Share Posted January 3, 2021 (edited) Hi OneMoreFarang, Perhaps it is wise to select each power tool on its own merits but notwithstanding that it is of a reputable brand ; Likely to be the situation that : Brand X is better than all the other Brands for GOOD + CHEAP particular Battery-powered Power Tool Brand Y is better than all the other Brands for GOOD + CHEAP a different particular Battery-powered Power Tool Re ; Battery-powered Impact Drivers Berala as a Brand was highly recommended to me by an excellent Thai technician who worked in the R & D department of a major motor vehicle plant ; He told me that his Berala has lasted for years of daily frequent robust use, incl. removing wheels from hubs I note that the Berala 98Volt DTW-285 or DTW285 models on Lazada.co.th are only in choice of : 3/8 Inch Male Drive or 1/2 Inch Male Drive Personally,- I prefer to get a 3/4 Inch Male Drive ; Because,- most of the Impact Drive Sockets available in retail shops are of 3/4 Inch Female Drive Prices start from approx. THB 1,600 As expected ; 2 Batteries supplied free with the tool ; All fit into a supplied free plastic carry-box with integrated handle. I am a touch concerned about the genuineness of products for sale on internet platforms though. Regards, Our Man in the Tropics Edited January 3, 2021 by Our Man in the Tropics Link to comment Share on other sites More sharing options...
Farma Posted January 3, 2021 Share Posted January 3, 2021 Most of mine are Makita with a Bosch 1/2" hammer drill and a couple of other tool. What has surprised me is how long a cheap Chinese made Clinton brand (yepp bought when he was in office) hammer drill is still going. I passed it out to the village years ago and brother in law is still using it. 1 Link to comment Share on other sites More sharing options...
3STTW Posted January 3, 2021 Share Posted January 3, 2021 Stanley, Bosch, Makita and DeWalt. I've been getting mine from Thaidee Homemart on Lazada, who have been super reliable and way cheaper than Homepro and Thai Watsadu. 2 Link to comment Share on other sites More sharing options...
Speedhump Posted January 3, 2021 Share Posted January 3, 2021 On 12/30/2020 at 7:05 PM, Kwasaki said: The cheapest from Global house I'm not going into business. ???? Er. A friend has to borrow my old Black and Decker hammer drill to drill into hard concrete because the Asian brand he bought here was woefully underpowered. Exterior walls in good housing developments like mine are within spec. Link to comment Share on other sites More sharing options...
action Posted January 3, 2021 Share Posted January 3, 2021 I have a workshop full of tools and have used almost every brand I can find. Here is my two satang, #1 best tools you can buy in Thailand = Milwaukee (not mentioned on this thread yet, so I suggest you check them out) #2 Bosch Link to comment Share on other sites More sharing options...
Kwasaki Posted January 3, 2021 Share Posted January 3, 2021 1 hour ago, Speedhump said: Er. A friend has to borrow my old Black and Decker hammer drill to drill into hard concrete because the Asian brand he bought here was woefully underpowered. Exterior walls in good housing developments like mine are within spec. Well Er !! Black & Decker were consider rubbish in UK. I found them OK and and you can get hammer drills in global house cheap just as good not underpowered at all just as good as black & decker. Link to comment Share on other sites More sharing options...
PGSan Posted January 3, 2021 Share Posted January 3, 2021 (edited) On 12/31/2020 at 7:23 AM, Yellowtail said: Battery powered tools are great as far as they go, How far is that? Edited January 3, 2021 by PGSan 1 Link to comment Share on other sites More sharing options...
PGSan Posted January 3, 2021 Share Posted January 3, 2021 7 minutes ago, Kwasaki said: Black & Decker were consider rubbish in UK. Mine were not! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now