Pib Posted March 18 Share Posted March 18 Just to separate this curiosity question from my above long winded posts, for you Seal owners when the A/C sometimes turns itself on automatically for X-amount of minutes when you turn off the car "and probably locked the car" have you ever tried then using the key FOB to press unlock and then immediately lock to see if that turns off the A/C? I know on my Atto that unlock & lock has worked each and every time to turn off the A/C that automatically started itself. Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 19 Share Posted March 19 19 hours ago, Pib said: Just to separate this curiosity question from my above long winded posts, for you Seal owners when the A/C sometimes turns itself on automatically for X-amount of minutes when you turn off the car "and probably locked the car" have you ever tried then using the key FOB to press unlock and then immediately lock to see if that turns off the A/C? I know on my Atto that unlock & lock has worked each and every time to turn off the A/C that automatically started itself. But, why would you want to stop the A/C in this situation when, as you told us earlier: Link to comment Share on other sites More sharing options...
Pib Posted March 19 Share Posted March 19 1 minute ago, Andrew Dwyer said: But, why would you want to stop the A/C in this situation when, as you told us earlier: Because no drying of the evaporator is really required in some situations but the car gets fooled into thinking so. Examples: - say the car has been setting for hours in your carport...A/C has not turned on/been running for hours....evaporator fins are dry as a bone. However, you open the door for a few seconds to take a peek at something/grab something out of the car and then you lock the door which might fool/trigger the car into thinking the evaporator fins need drying off so the A/C runs for 10-15 minutes. - say the car is charging....the A/C has not turned on..."but" because you lock the door the A/C turns on and runs for 10-15 minutes thinking it needs to dry the evaporator. 1 Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 19 Share Posted March 19 3 minutes ago, Pib said: Because no drying of the evaporator is really required in some situations but the car gets fooled into thinking so. Examples: - say the car has been setting for hours in your carport...A/C has not turned on/been running for hours....evaporator fins are dry as a bone. However, you open the door for a few seconds to take a peek at something/grab something out of the car and then you lock the door which might fool/trigger the car into thinking the evaporator fins need drying off so the A/C runs for 10-15 minutes. - say the car is charging....the A/C has not turned on..."but" because you lock the door the A/C turns on and runs for 10-15 minutes thinking it needs to dry the evaporator. Okay, I see what you are saying now 👍 Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 19 Share Posted March 19 Okay, so what would you like to see in the next OTA update ? JB has mentioned that he would like some software update to stop the stuttering when flooring it . Others have mentioned the seat memory buttons are buried deep in the info screen. Personally I think the shortcut screen is underused: currently I only use the “ swiping down from the top “ action to change the regen settings. The seat memory buttons should be on there at the very least. In fact i think a create shortcut button should be permanently embedded on every page allowing you to customise the shortcut screen at will, currently is limited: I don’t consider any of those as necessary shortcuts, would prefer seat memory and regen settings, anymore anyone ?? I also mentioned that I don’t like the door handles retracting when selecting reverse, don’t see the need and find the handles retracting when stationary a little dodgy, except when you are specifically locking from inside or out of course. I personally prefer the screensaver with the countdown clock (when pressing the mute button) to the 3 options, find them washed out and the clock not centred angers my OCD ! So a better selection of screensavers, or ability to load your own, failing this make the countdown clock screensaver independent from muting music. Other than my small selection, anyone else got anything they would like to see changed by an OTA ?? 1 Link to comment Share on other sites More sharing options...
macahoom Posted March 19 Author Share Posted March 19 46 minutes ago, Andrew Dwyer said: I personally prefer the screensaver with the countdown clock What's this? Link to comment Share on other sites More sharing options...
macahoom Posted March 19 Author Share Posted March 19 47 minutes ago, Andrew Dwyer said: Other than my small selection, anyone else got anything they would like to see changed by an OTA ?? Seat memories. An option to turn on the 3 original, extremely loud, pedestrian warning sounds. I am sure there are more but I can't think of them at the moment. Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 19 Share Posted March 19 18 minutes ago, macahoom said: What's this? When you press down on the volume scroll wheel ( right hand side of the gear shifter ) it mutes your music, but also brings up a rather fetching screen saver in black, with the clock centred and seconds ticking away around the clock. Why it should bring it up as well as muting I don’t know …. but I like it !! 1 Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 19 Share Posted March 19 For those unaware: 1 Link to comment Share on other sites More sharing options...
mistral53 Posted March 20 Share Posted March 20 I saw on YT that 'down-under' they got a new OTA to 2401, I am still on 2310 - what SW version are you guys on? link to the clip: 1 Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 20 Share Posted March 20 7 hours ago, mistral53 said: I saw on YT that 'down-under' they got a new OTA to 2401, I am still on 2310 - what SW version are you guys on? link to the clip: 2310 here also . I think down under they were late getting their first update, don’t see anything on there we haven’t had for a while. Link to comment Share on other sites More sharing options...
macahoom Posted March 21 Author Share Posted March 21 A couple of weeks ago, I found myself in my AWD Seal on a steep gradient with very loose gravel/stones. I was very disappointed; I was not getting the traction I would have expected in an AWD vehicle. These two short videos may explain why. What a joke! Part 1: https://youtu.be/eENx7rscQ80?si=oH5LLEydTLHCPZNC Part 2: https://youtu.be/1-tDRGLbTrA?si=Xq5e9iMbxIO5lJGe Link to comment Share on other sites More sharing options...
JBChiangRai Posted March 21 Share Posted March 21 4 minutes ago, macahoom said: A couple of weeks ago, I found myself in my AWD Seal on a steep gradient with very loose gravel/stones. I was very disappointed; I was not getting the traction I would have expected in an AWD vehicle. These two short videos may explain why. What a joke! Part 1: https://youtu.be/eENx7rscQ80?si=oH5LLEydTLHCPZNC Part 2: https://youtu.be/1-tDRGLbTrA?si=Xq5e9iMbxIO5lJGe Did you try pressing the snow/gravel button? Link to comment Share on other sites More sharing options...
macahoom Posted March 21 Author Share Posted March 21 2 minutes ago, JBChiangRai said: Did you try pressing the snow/gravel button? If you watch the videos (they're very short) and read the comments, it would appear the AWD cars are not AWD. BYD have been made aware of this and are going to rectify. Sounds crazy but it looks like it's true! 1 Link to comment Share on other sites More sharing options...
JBChiangRai Posted March 21 Share Posted March 21 5 minutes ago, macahoom said: If you watch the videos (they're very short) and read the comments, it would appear the AWD cars are not AWD. BYD have been made aware of this and are going to rectify. Sounds crazy but it looks like it's true! Interesting, I suspect the front when are only driven after rollout and/or when the vehicle is under high power. I read in the comments that when in ECO mode it only drives the rear wheels, I suspect it may be the front wheels, Porsche only drive the front wheels in ECO mode unless you open the throttle fairly wide. Link to comment Share on other sites More sharing options...
macahoom Posted March 21 Author Share Posted March 21 (edited) 6 minutes ago, JBChiangRai said: or when the vehicle is under high power. See the second video after the ashen-faced Chinese BYD technician fixed the car. Doesn't appear to need high power for the AWD to work. Edited March 21 by macahoom Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 21 Share Posted March 21 (edited) If you watch the two videos you will see that the car is only driving the rear wheels initially despite ITAC and snow mode enabled. After the update by visiting BYD techs AWD is enabled. The question now is how do you know your car is enabled ? I would suggest finding a suitable gravel incline, enabling ITAC and snow mode to test, if in doubt visit your dealer. Hopefully the dealer is aware of any such update. Edited March 21 by Andrew Dwyer 1 Link to comment Share on other sites More sharing options...
macahoom Posted March 21 Author Share Posted March 21 3 minutes ago, Andrew Dwyer said: The question now is how do you know your car is enabled ? Hopefully they can fix it with an OTA update. I don't know why they didn't explain more clearly in the second video how, and how long it took, to fix the error. Link to comment Share on other sites More sharing options...
macahoom Posted March 21 Author Share Posted March 21 6 minutes ago, Andrew Dwyer said: The question now is how do you know your car is enabled ? I'll have to go back to the loose gravel slope I was on. Unfortunately it's about 300km from where I live! Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 21 Share Posted March 21 4 minutes ago, macahoom said: I'll have to go back to the loose gravel slope I was on. Unfortunately it's about 300km from where I live! Yes !, the rollers are the ultimate test but who has those ! I suspect there will be a few AWD owners demanding answers from their dealers after the videos. Would putting it on the lift and raising a few inches not enable you to check if all wheels are being driven ?? Link to comment Share on other sites More sharing options...
macahoom Posted March 21 Author Share Posted March 21 9 hours ago, mistral53 said: I am still on 2310 - what SW version are you guys on? 2310. Link to comment Share on other sites More sharing options...
mistral53 Posted March 21 Share Posted March 21 Its obvious to me (by the 3.8 sec acceleration capability and the max power reading of 390 kW)) that the car is essentially 4WD, but not in all conditions. I would think that BYD has tested the snow scenario, too - how this slipped by their testing for the final product is unbelievable. Maybe it's just an export problem? But as one commenter pointed out - maybe the car will start to under steer more if the patch is not properly tuned? 1 1 Link to comment Share on other sites More sharing options...
Popular Post Pib Posted March 21 Popular Post Share Posted March 21 10 hours ago, macahoom said: Hopefully they can fix it with an OTA update. I don't know why they didn't explain more clearly in the second video how, and how long it took, to fix the error. This link below in the comments of the 2nd video gives more details. As of 18 March 2024 an OTA update will need to be finalized and released. When? Who knows. Link to full details: https://teknikensvarld-expressen-se.translate.goog/nyheter/bil-och-trafik/elbil-laddhybrid/efter-vart-test-byd-atgardar-fyrhjulsdrivna-seal/?_x_tr_sl=sv&_x_tr_tl=en&_x_tr_hl=sv&_x_tr_pto=wapp Partial Quote from link: Quote BYD explains the approach to the update: The Swedish newspaper Teknikens Värld has reported on BYD Seal AWD (Excellence). In their test, Teknikens Värld reported that the AWD system in the BYD Seal did not deliver the performance that could be expected. Their main criticism was that the front wheels didn't engage (enough), while the rear wheels slipped on a snowy and steep hill. Their conclusion: The BYD Seal AWD did not perform as an all-wheel drive car. In response, BYD's research and development department together with related teams carefully listened to the feedback from Teknikens Värld, analyzed it and concluded that the software in BYD Seal AWD needed to be updated. As a result, new software was initiated. The system was tested in BYD's R&D center in China and also in the northern part of China under winter conditions. This was done to simulate the circumstances that the journalist test team from Teknikens Värld had done. After the new test was successfully verified, BYD's R&D team immediately traveled to Sweden on March 6 to conduct new tests. As the weather had changed, snowy conditions could not be found. Therefore, the team went to Sweden again on March 15, but now simulated the winter conditions using the rolling equipment that Teknikens Värld had also used earlier in its own test. BYD tested the new software several times and solved the shortcomings that Teknikens Värld pointed out in the AWD system in the BYD Seal. With this updated software, BYD improved the torque distribution between the front and rear wheels. To be completely transparent, new tests were initiated which were witnessed and verified by journalist Erik Wedberg from Teknikens Värld. He concluded that the update of the BYD Seal AWD's software had been carried out satisfactorily and that the BYD Seal AWD with the new software is performing as it should. BYD will implement the software update and will issue it to authorized BYD dealers as soon as possible. At a later stage, the software will be delivered to all BYD Seals via OTA update. BYD thanks Teknikens Värld's test team and especially Erik Wedberg for their comments and help to make the BYD Seal a better car. //BYD's PR department 1 2 Link to comment Share on other sites More sharing options...
JBChiangRai Posted March 21 Share Posted March 21 This is my sw version, is it up to date? Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 21 Share Posted March 21 1 hour ago, JBChiangRai said: This is my sw version, is it up to date? I would say no, 2310 seems to be the latest here, here’s mine: some differences with the FWC, Dyna and OSD software versions also but I have no idea what any of those mean !! I redacted a couple of numbers, seen others do it 😀 1 Link to comment Share on other sites More sharing options...
JBChiangRai Posted March 22 Share Posted March 22 Thanks, should I get a notification sometime for it to update? I’ve had the car three months and not had any notification yet? Link to comment Share on other sites More sharing options...
macahoom Posted March 22 Author Share Posted March 22 7 minutes ago, JBChiangRai said: Thanks, should I get a notification sometime for it to update? Yes, a little red dot on your big screen. They seem to have forgotten about you. I think you should have a word with your dealership. 1 Link to comment Share on other sites More sharing options...
JBChiangRai Posted March 22 Share Posted March 22 Just now, macahoom said: Yes, a little red dot on your big screen. They seem to have forgotten about you. I think you should have a word with your dealership. thanks I will Link to comment Share on other sites More sharing options...
Andrew Dwyer Posted March 22 Share Posted March 22 43 minutes ago, JBChiangRai said: Thanks, should I get a notification sometime for it to update? I’ve had the car three months and not had any notification yet? mine started off with a red dot on the bell icon ( top centre of info screen )as it was uploading then moved to a red dot on the car settings icon ( bottom right of screen ) when ready to download. I heard that the update numbers 2309, 2310, 2401 ( AUS ) and the previous version 2307 ? are dates of when the update was created, presumably in China. When I received my car , Nov 30th, it had this version 2310080.1 and the OTA set it to 2310180.1, a small change. So, going by that @JBChiangRai I would say you are behind, do you have the browser and karaoke ? ( swipe left from Home Screen. 1 Link to comment Share on other sites More sharing options...
JBChiangRai Posted March 22 Share Posted March 22 I don’t have karaoke etc Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now