I already have a cigarette lighter adaptor from long ago ans on my Ymaha Virago I have soldered 1 wires to each battery terminal and then wired them to a simple connector block.

From the output of that I can wire in my adaptor or leave it out as I require and as it sits under the saddle it is pretty much waterprrof.

However it is not fused so this morning I went to my local village shop that deals with most things mechanical and electrical from stationary engines through motor bikes, cars and tractors.

The owner and his daughter speak reasonable English and I speak some Thai.

However as an ex Boy Scout i came prepared with a copy of the photos from the OP of this thread.

They were a bit confused with my verbal request but on showing the photos of the full lead and the fused part only it was no problem.

Th cable with the fuse was 40 baht and 2 x 10 amp fuses were 5 baht each.

They apologised for not having smaller fuses but I can always buy smaller ones at 5 baht and the 10 amp fuses will do as spares.

Th cable with the fuse was 40 baht and 2 x 10 amp fuses were 5 baht each.

that sounds a bit more like it ,almost 2000 thb for a piece of wire and a cigar connector sounds like there is good profit in these kits

i need to get or make one but for a galaxy S2 instead of an iphone4