Skip to content
View in the app

A better way to browse. Learn more.

Thailand News and Discussion Forum | ASEANNOW

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Which Insulation Material under the Roof?

Featured Replies

2 hours ago, Encid said:

 

 

So it is the passing wind that spins them aiding extraction!

  • Replies 129
  • Views 18.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Agreed, here it's typically galvanised steel frame and cement tiles.   I had spray foam installed in our place some 7 years ago and it's proved excellent.   We had no previous leaks anyway, but the fo

  • bankruatsteve
    bankruatsteve

    Ventilation is necessary and does help. But, no amount of ventilation, even with fans or whatever, is going to cool an attic space in 40C ambient. Reflecting the radient and convection works best for

  • You need plenty of airflow in the roof space above the ceiling before you need to think of insulation .

Posted Images

1 hour ago, gamb00ler said:

earlier post to mine has same content

I like to think of it as adding air conditioning to a car, you can stay without it if you like, but when these whirly birds spin, they spin, that said, they extracts a lot of hot air which I don't want in my roof space.

 

So it's a personal choice, and as I know they work for me, they suit me, I am not going to try and convince the die hard ones, let them be without them for all I care, I'm cool ????

 

15 minutes ago, Will B Good said:

So it is the passing wind that spins them aiding extraction!

Physics is so last century...

Marketing Rules!

5 minutes ago, 4MyEgo said:

I like to think of it as adding air conditioning to a car, you can stay without it if you like, but when these whirly birds spin, they spin, that said, they extracts a lot of hot air which I don't want in my roof space.

Viva Marketing!

28 minutes ago, Will B Good said:

So it is the passing wind that spins them aiding extraction!

They do work as a static vent but they work so much better with wind assistance.

Soffit vents (or air intakes) are just as important to facilitate extraction.

The following video provides a good demonstration.

 

 

3 minutes ago, Encid said:

They do work as a static vent but they work so much better with wind assistance.

Again, it's another marketing video, nicely produced I should add.

I'm sure there are many more similar videos out there.

Those videos never provide any evidence or anything of scientific value to back up their claims.

2 hours ago, sometimewoodworker said:

Probably I should have addressed the post to @Will B Good since it seems he may have similar tiles to yours and not know about the cut insulation designed specifically for that style of ceiling.

No problem the foil cover rolls from homemart at the time were the same width as our ceiling tiles.

So no problems and the room is 4 X 8 and the rolls were 4 m.

 

1 hour ago, Kwasaki said:

No problem the foil cover rolls from homemart at the time were the same width as our ceiling tiles.

So no problems and the room is 4 X 8 and the rolls were 4 m.

 

Well it certainly can be a problem. In the case of my old ceiling it would have been impossible to roll any width of insulation or any length. This was because the wires holding up the metal grid that the panels sit in obstructed in both directions. This meant that the ONLY possible insulation had to be the size of the panel it was on top of. 
 

in our current house we have continuous ceilings so roll insulation works easily 

  • Author
12 hours ago, Will B Good said:

So it is the passing wind that spins them aiding extraction!

Consequently, a full-of-beans diet is recommended?

  • Author
  • Popular Post

Days 5-6-7: Laying insulation batts; Laying Roofing Sheets

 

Having talked a lot and in detail about the works on my roof, I will summarise these next 3 days with just 3 pics, showing how the insulation batts were laid. They fitted all in all quite well between the rails and wires that support the dropped ceiling.

 

Obviously, there were a number of gaps. I had ordered the number of batt rolls sufficient to cover the ceiling, plus 10%. I think generally it’s safe and wise to estimate the amount of materials required for a given type of work, and add 5 to 10% to be sure to finish the work. As indeed I had a few rolls left after covering the ceiling, I had those extra rolls laid across the first layer in the places with the most gaps (Pics 14 and 15).

 

Day 5 was a Saturday. As workers were taking Sunday off, I was a bit nervous with the roof being open and the occasional rains already coming. But the roof on the house itself was all in place by the end of that day. I went to take a pic under the roof now completed (Pic 16). What is certainly not usual is the steel structure of the old roof that we thought we better leave in place. I thought earlier that it had rusted quite a bit, but in fact it had been painted in a rusty red colour! All in all, I think the work looked clean enough, if maybe not 100% to western standards. In any case, we immediately noticed a clear improvement with the temperatures in the habitation underneath. A successful operation so far!

 

Days 6 and 7, we started extending the roof to cover the internal courtyard that separates our 2 houses and which we use as an outdoors kitchen.

14_092805.jpg

15_092818.jpg

16_154458.jpg

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.