Jump to content

Recommended Posts

Posted (edited)

I've never had someone else hang pictures on the wall for me, but, there are several reasons I may do that now, including my impaired vision, a fear of falling, and not wanting to damage the walls of a place I am renting. In the US I knew how to locate studs in the wall and use those, but these walls are typical Thai concrete whatever: afaik I am the only stud in the house.

 

I know several good local framers, but, don't know anyone who specializes in hanging. I experimented with some 3M stick-on mounts: they be crap.

 

Any ideas ?

 

thanks, ~o:37;

Edited by orang37
memory recovered after alien abduction
Posted (edited)

do you know a local thai handiman ?    best way to proceed is to  drill (with a good drill) a small hole, put a plastic thingy (pook, in thai) in the hole , and then a screw in the pook.

When/ if leaving the hole can be spackled and painted over to leave a smooth finish .  I just leave the few

in our rental house..... for other renters to hang something on.

Helps to know the exact color of paint on wall if owner wants you to fix hole when leaving.

Edited by rumak
Posted

These.....Hole is drilled the same diameter as the plastic anchor.....

The anchor should be snug & pushed/tapped into the hole....

The screw is then screwed into the anchor creating a strong compression grip into the wall.....

You want to drill in to the same depth as the length of the anchor....

images-133.jpg

  • Like 2
Posted

You first better check with your landlord,before drilling any holes

in their walls, some do not allow it,or charge you for the privilege.

regards Worgeordie

  • Like 1
Posted

Consider the weight of the object to be hung. That's important. Then find the corresponding size of expansion plug. These come in all sizes, from one inch long and very thin to several inches long and as thick as a small cigar. If you are just hanging a small framed picture, a one-inch plug will do. A Flat-screen TV will require more.

Posted

Yes to all the above.

Do check out your landlord first , if he requires you to conceal any holes upon leaving bear in mind that matching the colour is not always as easy as it sounds.

If the wall is concrete drill a small hole first ( around 3mm ) to stop the finish drill size wandering.

On the plus side , I learnt a new word today “ spackled “ !

  • Like 1
  • Haha 1
Posted
9 hours ago, pgrahmm said:

These.....Hole is drilled the same diameter as the plastic anchor.....

The anchor should be snug & pushed/tapped into the hole....

The screw is then screwed into the anchor creating a strong compression grip into the wall.....

You want to drill in to the same depth as the length of the anchor....

images-133.jpg

Note - cement/tile/masonry drills are different than wood/metal drill bits.....They have a more biting leading edge....Usually use exerting pressure then firmly easy,  then pressure then firmly easy to help the bite.....I mark the drill bit at the same length as the anchor to be installed know where to stop.....

images-71.jpg

Posted
1 hour ago, Andrew Dwyer said:

Do check out your landlord first , if he requires you to conceal any holes upon leaving bear in mind that matching the colour is not always as easy as it sounds.

If it's not a Rembrandt, just leave the picture on the wall when checking out.

  • Like 1
  • Confused 1
Posted
1 hour ago, Andrew Dwyer said:

On the plus side , I learnt a new word today “ spackled “ !

And I learned a new Thai saying I would have thought would be completely different... :coffee1:

 

a screw in the pook

  • Like 1
Posted

Yes to all of the above.

 

orang37, if you find someone good, please pass on the contact. Thanks. We are also looking for someone who knows what they are doing. We have many items that need to be hung and they are identical in size, therefore they have to be absolutely straight, spaced evenly, and done by someone who knows what they are doing.

  • Like 1
Posted

3M makes a super strength double sided tape for hanging stuff in bathrooms. Works well out of bathrooms too. Home Pro has it.


Sent from my iPod touch using Thaivisa Connect

Posted
32 minutes ago, Bill97 said:

3M makes a super strength double sided tape for hanging stuff in bathrooms. Works well out of bathrooms too. Home Pro has it.


Sent from my iPod touch using Thaivisa Connect

Yeah, the 3M stuff works on the tile walls quite well. Lasts for about 3 years or so.

Posted
2 hours ago, eyecatcher said:

I think we covered every base in my  tongue in cheek thread last month.

Loads of ideas here

 

That's a good thread. But I want someone who can hang about 3 rows; each row with about 8 frames, spaced evenly from frame to frame side to side and evenly spaced on each row. So someone who can properly measure and drill 24 holes at the correct spot.

  • Like 1
Posted
10 hours ago, sfokevin said:
12 hours ago, Andrew Dwyer said:

On the plus side , I learnt a new word today “ spackled “ !

And I learned a new Thai saying I would have thought would be completely different... :coffee1:

 

a screw in the pook

you never had a "screw in the pook" ?     yep, both spackle and pook were in my first post to the mystical and whimsical poster who needs help with such complex matters (real life, that is).   I also did not get a like for my suggestion and have been sitting at home moping all day.  booohoooo  .38

  • Like 1
Posted
On 2/5/2019 at 11:30 AM, Bill97 said:

3M makes a super strength double sided tape for hanging stuff in bathrooms. Works well out of bathrooms too. Home Pro has it.

I wasted some baht on 3m rxtra heavy stick-on hanging hooks: not reliable.

 

~o:37;

  • Like 1
Posted (edited)
39 minutes ago, orang37 said:

I wasted some baht on 3m rxtra heavy stick-on hanging hooks: not reliable.

 

~o:37;

how long did they last before you dropped ?

 

a little "black humor"  should elicit some barbs from the gallery .   

Edited by rumak
Posted

I use a leveler (liquid with air bubble) that has a laser beam attached, to get a picture to hang beautifully.  It takes two folks to get the markings done, but it’s a quick job.

 

If you’re not worried about power/water issues behind your drill-spot, I’d say go for it: forgiveness vs permission. (But that’s just me).

 

 Also, I have used white toothpaste (tinted with acrylic or other pigments) to quickly cover drill holes.  Of course sparkle works too.  But, IMO, it’s really not that hard to get a spot-on color match.

 

  • Like 1
Posted
On 2/4/2019 at 10:59 PM, pgrahmm said:

These.....Hole is drilled the same diameter as the plastic anchor.....

The anchor should be snug & pushed/tapped into the hole....

The screw is then screwed into the anchor creating a strong compression grip into the wall.....

You want to drill in to the same depth as the length of the anchor....

images-133.jpg

We used to call them RAWLPLUGS.

  • Like 1
Posted
40 minutes ago, wgdanson said:

We used to call them RAWLPLUGS.

its a sa crew  in  a  pook  .   sa peak thai

  • Haha 1
Posted
15 hours ago, rumak said:

how long did they last before you dropped ? 

I don't remember ... I get all choked up trying to think about it.

 

~o:37;

 

Posted
1 minute ago, orang37 said:

I don't remember ... I get all choked up trying to think about it.

 

~o:37;

 

call me next time.   I think i can put an end to that . 

give me five.   i won't leave you hangin  ????

 

.38  

Posted

Tsk, Tsk.

Can put a man on the moon but can't hang a picture on a concrete wall.????

 

Get a UK mate to bring you some picture hooks

 

standard-no.0-picture-hooks-including-pi

 

Or You might find below at Home Pro?

 

blitz-tris-hard-wall-hooks-large--1852-p

 

But they are not as good as the old fashioned one above.

Posted
4 hours ago, VocalNeal said:

Tsk, Tsk.

Can put a man on the moon but can't hang a picture on a concrete wall.????

 

Get a UK mate to bring you some picture hooks

 

standard-no.0-picture-hooks-including-pi

 

Or You might find below at Home Pro?

 

blitz-tris-hard-wall-hooks-large--1852-p

 

But they are not as good as the old fashioned one above.

Neither of those would work on 90% of walls in Thailand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...