Jump to content

Recommended Posts

  • Replies 3.3k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted

So only one month? That has come down a lot. It was previously 3 months.

I booked mine in Sep.Yup,about 3 months.The guy called me on friday,he says the bike is ready but it is the green color.Well,who cares as long as it is an ER6N I'm going to collect the bike tomorrow.
Posted

A couple of full side shots as requested of the "thermos" radiator overflow mod. Also just did a number plate relocation mod like seen on "NormanW" er6n. Just a little different as I didn't drill the mounting screws directly through the plate itself, just used the existing studs & bent up a couple of small brackets.

post-130719-13532112294919_thumb.jpg

post-130719-13532112474023_thumb.jpg

post-130719-1353211277172_thumb.jpg

post-130719-13532113148615_thumb.jpg

Posted

Tall request....... I would like to see that rear light cluster of yours working in the day time, I was going to buy one a couple of months back but wasn't sure of the visibility of the indicators to other road users.

Karl :)

Posted

Just flew back to work Karl so your going to have to wait 3 weeks. Once I get back home I will take & video in high levels of light to demonstrate the operation of the indicators & break lights.

Posted

Just flew back to work Karl so your going to have to wait 3 weeks. Once I get back home I will take & video in high levels of light to demonstrate the operation of the indicators & break lights.

Fantastic, thank you :)

Posted

Do the bib give you any hassle for having your plate there?

In nearly a year of having my plate in the same location the police have ticketed me once but that was in Prawet during Songkran and we all know about those Prawet boys...... Either way it's illegal to have it located at such an angle and obstructed by the rear wheel so it's my own fault, but a 100Baht fine (reduced from 1000 by a police friend of mine) is nothing to keep the rear end of the bike looking mighty fine IMO :D

Posted

Do the bib give you any hassle for having your plate there?

In nearly a year of having my plate in the same location the police have ticketed me once but that was in Prawet during Songkran and we all know about those Prawet boys...... Either way it's illegal to have it located at such an angle and obstructed by the rear wheel so it's my own fault, but a 100Baht fine (reduced from 1000 by a police friend of mine) is nothing to keep the rear end of the bike looking mighty fine IMO biggrin.png

Famous last words - Never for me. thumbsup.gif

Posted

LOL :D

I hope to have that Mexican with you and Bruce next month.......... For everyone else’s’ information, I'm talking about Mexican Food :D

Posted

LOL biggrin.png

I hope to have that Mexican with you and Bruce next month.......... For everyone else’s’ information, I'm talking about Mexican Food biggrin.png

Aye, Christmas and New Year are not far away now mate.

I'll post a pic of the Yoshi when I get 5 mins smile.png

Meanwhile here's a pic of what I would like or something similar smile.png

post-52293-0-87831800-1353417967_thumb.j

Posted

Bangkok based, got a er6n 2012.. Can anyone give me advice on where to buy mods? I'm wanting the new zard full system, tail tidy, some Matt black paint work, carbon front wheel cover, new mirrors.. List goes on..

I'm sukhumvit.. The new app for maps is getting me nowhere!

Posted

Here are some pics of the racesets - no height adjustment but good quality. 6.5kBaht from Kspeed BKK.

Notice the thickness of these compared with lots of others that are half the thickness. Just a thought.

Getting them in black was a challenge as well!

Just ordered a full Leo Vince system from BP Racing in Pattaya - will take a month to land (that will give me more time to save up for it :) )

Keep those good times rolling.

post-52293-0-29004000-1353812593_thumb.j

post-52293-0-00660400-1353812603_thumb.j

post-52293-0-74491100-1353812614_thumb.j

post-52293-0-97909700-1353812627_thumb.j

Posted

Yeh, Greg has kindly loaned it to me while I wait for the Leo Vince GP (I've changed my mind) and gone for that. He took pity on me while I was riding the bike with the hairdrier standard exhaust 555

Posted

For those who are looking for esthetic mods, I discovered a shop which is doing some nice aluminium parts at reasonable prices in china town.

It is called bikers (www.bikers.co.th). On their website go to accessories then select Kawasaki Er6n....

I bought a few parts for my Versys and it is good quality.

Ride safe!

Posted

For those who are looking for esthetic mods, I discovered a shop which is doing some nice aluminium parts at reasonable prices in china town.

It is called bikers (www.bikers.co.th). On their website go to accessories then select Kawasaki Er6n....

I bought a few parts for my Versys and it is good quality.

Ride safe!

Most of their stuff adds weight and looks ghastly.... But each to their own :)

  • 2 weeks later...
Posted

Does anyone knows where can I get the sw motech rack system for the side carrier box?Thanks.

Panda Rider is the authorized importer of SW Motech in Thailand. Their contact details/location/website are in the motorcycle directory project...

Posted

Does anyone knows where can I get the sw motech rack system for the side carrier box?Thanks.

Panda Rider is the authorized importer of SW Motech in Thailand. Their contact details/location/website are in the motorcycle directory project...

Thanks mactao I will go look at their website.
Posted

I just got a new Throttlemiester cruise control in the U.S. for my ER6N & it rocks!!!!!! Next is the gel seat to mod the front portion of the seat along with changing the seat forward position upwards instead of the standard down position so the ole lady doesn't slide forward & crush my nards against the tank sick.gifcrazy.gif.

Posted

Bira was a wash out today :(

I was the only one to get out before the downpour for about 10 laps. Khun Mint said I didn't have to pay. I would have preferred to pay and get some more laps in but hey, you can't win all the time can yer?

post-52293-0-47162900-1355136631_thumb.jpost-52293-0-80740500-1355136649_thumb.jpost-52293-0-13159100-1355136670_thumb.j

Posted

Can someone please recommend places in Bangkok where I can buy a sturdy Thai-made rack for ER-6F 2009? I don't really want to pay for SW-Motech.

I don't need any fittings for the box, will just strap a large drybag on top of the rack.

Posted

Can someone please recommend places in Bangkok where I can buy a sturdy Thai-made rack for ER-6F 2009? I don't really want to pay for SW-Motech.

I don't need any fittings for the box, will just strap a large drybag on top of the rack.

have a look through the ER6thailand.com classified section. I'm sure i saw some well priced racks a while back. But i warn you, there are alot of pages to search through, as most of the companies use multiple page threads to list and sell their latest products, resulting in literally 100's of pages per company.

Sometimes they pop up in the secondhand section below the sponsored threads :)

Posted

Here are some pics of the racesets - no height adjustment but good quality. 6.5kBaht from Kspeed BKK.

Notice the thickness of these compared with lots of others that are half the thickness. Just a thought.

Getting them in black was a challenge as well!

Just ordered a full Leo Vince system from BP Racing in Pattaya - will take a month to land (that will give me more time to save up for it smile.png )

Keep those good times rolling.

post-52293-0-29004000-1353812593_thumb.j

post-52293-0-00660400-1353812603_thumb.j

post-52293-0-74491100-1353812614_thumb.j

post-52293-0-97909700-1353812627_thumb.j

Norman that is exactly what I am looking for!

Do you have a link or part numbers so I can order the kit as well? I looked online at K speed & had a hard time finding any info on the motive line other than the side markers.

Thanks Much appreciated

Barry

Posted

Here are some pics of the racesets - no height adjustment but good quality. 6.5kBaht from Kspeed BKK.

Notice the thickness of these compared with lots of others that are half the thickness. Just a thought.

Getting them in black was a challenge as well!

Just ordered a full Leo Vince system from BP Racing in Pattaya - will take a month to land (that will give me more time to save up for it smile.png )

Keep those good times rolling.

post-52293-0-29004000-1353812593_thumb.j

post-52293-0-00660400-1353812603_thumb.j

post-52293-0-74491100-1353812614_thumb.j

post-52293-0-97909700-1353812627_thumb.j

Norman that is exactly what I am looking for!

Do you have a link or part numbers so I can order the kit as well? I looked online at K speed & had a hard time finding any info on the motive line other than the side markers.

Thanks Much appreciated

Barry

That's funny, as I got them from K Speed. I don't have any part numbers sorry.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...