Jump to content

Honda Cbr 250R 2011


LOSHonda

Recommended Posts

  • Replies 5.3k
  • Created
  • Last Reply

Top Posters In This Topic

You know you're right - it's shocking not having a fuel gauge - absolutely shocking :lol: I'm selling the Ninja - in fact that's it - you've got me so worked up that I'm never riding my K5 Gixxer again since that doesn't have one either - after all what good is knowing how far your bike will go before you need to fill up if you don't even know how many 'bars' you've got left? :lol: :lol: :lol:

Keep checking for that fuel light dude :lol:

I honestly thought you had to check a box agreeing that you're over 13 years old when signing up here.

Edited by hehehoho
Link to comment
Share on other sites

You know you're right - it's shocking not having a fuel gauge - absolutely shocking :lol: I'm selling the Ninja - in fact that's it - you've got me so worked up that I'm never riding my K5 Gixxer again since that doesn't have one either - after all what good is knowing how far your bike will go before you need to fill up if you don't even know how many 'bars' you've got left? :lol: :lol: :lol:

Keep checking for that fuel light dude :lol:

I honestly thought you had to check a box agreeing that you're over 13 years old when signing up here.

I honestly thought spamming was disallowed - I feel your pain, believe me :lol:

Link to comment
Share on other sites

you should always know how far you can ride on your bike, how far you have left... I have a fuel gauge, but i dont look at it since it is not very accurate!

I just glance down and check how many km's i have done and stop by ptt...

I am happy to swap my new ninja for a gsxr... Just let me know!

Link to comment
Share on other sites

many good posts here!

does anyone know where i can order some red rim tape and that carbon style lookin' fuel lid (gas cap) cover?

www.srk-group.com make their own parts for 250's and seems ok for handlebars (metallic red & stronger than original)

wwwrideit.co.th have some covers and fairings and seems ok for the price..

will change my exhaust soon but still looking around and not sure about that shape of yoshimura..

if anyone (sumet or someone) knows about rim tape, and metallic red parts i'd love to know it..

thanx, d

Link to comment
Share on other sites

X-Speed have red rim tape for 450thb.

Speaking of X-Speed, this is their updated version of their CBR250R.

9_1418_6cbffc43e1341fc.jpg

The rear cowl looks slightly different to the other ones I've seen produced here. Looks nice, very nice.

Last time I was up there it was completely stripped down, think the forks are off the cbr600.

Edited by hehehoho
Link to comment
Share on other sites

many good posts here!

does anyone know where i can order some red rim tape and that carbon style lookin' fuel lid (gas cap) cover?

www.srk-group.com make their own parts for 250's and seems ok for handlebars (metallic red & stronger than original)

wwwrideit.co.th have some covers and fairings and seems ok for the price..

will change my exhaust soon but still looking around and not sure about that shape of yoshimura..

if anyone (sumet or someone) knows about rim tape, and metallic red parts i'd love to know it..

thanx, d

You should be able to order the red rim tape from any Honda dealer, they should have an accessory pamphlet for the 150/250.

This is the Honda 'CBR' tape on my 150; the same for the 250

post-70604-0-34778500-1315577022_thumb.j

Edited by taichiplanet
Link to comment
Share on other sites

Mine idles at 1500 rpm which seems a bit high even for a single. I was thinking of slowing the idle to 1000 rpm to see if it helps ease those pesky first gear changes that continue to bug me.Is 1000 rpm a good starting point?

Link to comment
Share on other sites

many good posts here!

does anyone know where i can order some red rim tape and that carbon style lookin' fuel lid (gas cap) cover?

www.srk-group.com make their own parts for 250's and seems ok for handlebars (metallic red & stronger than original)

wwwrideit.co.th have some covers and fairings and seems ok for the price..

will change my exhaust soon but still looking around and not sure about that shape of yoshimura..

if anyone (sumet or someone) knows about rim tape, and metallic red parts i'd love to know it..

thanx, d

You should be able to order the red rim tape from any Honda dealer, they should have an accessory pamphlet for the 150/250.

This is the Honda 'CBR' tape on my 150; the same for the 250

post-70604-0-34778500-1315577022_thumb.j

I have the rim tape, carbon gas cap protectors, and many other CBR accessories in stock. Just send me a message and let me know exactly what you need. Shipping is availabe anywhere in Thailand. Thanks.

Brian

Link to comment
Share on other sites

hi

how much would u guys think i can get for a cbr250 (no abs), black, 6k on it, no accidents. green book and warranty obv included. gonna sell in cm btw.

greetings

Well they are going for about 85,000b on the cbr250thai.com. the thai cbr250 forum.

Link to comment
Share on other sites

hi

how much would u guys think i can get for a cbr250 (no abs), black, 6k on it, no accidents. green book and warranty obv included. gonna sell in cm btw.

greetings

Well they are going for about 85,000b on the cbr250thai.com. the thai cbr250 forum.

That's pretty much what I would have said. If I sold my 4 month old abs model now I'd probably be looking for around the 95k mark, not that I'm selling ;)

Link to comment
Share on other sites

hi , 250 users<br>I'm crossing from 150 forum to check out something <br>I'm making a cosmetic fiberglass parts for CBR150FI<br>and well , the response are very well , so I think may be I should be able to move to 250 to since most of them are alike  and few are Identical , can use on both.<br>here's some prototype<br>turn signal indicator , adapt from Nouvo elegance<br>twin HID projector , insanely bright , improve visions water proof.<br>rear tire hugger , have some change on newer version , but overall look are still around this<br>wind screen , will made of fiberglass or polycarbonate  or acrylic.  still not decided yet<br><a href="http://img692.imageshack.us/img692/1299/img0277al.jpg" class="bbc_url" title="External link" rel="nofollow external"><img src="http://img641.imageshack.us/img641/156/img0284aao.jpg"><br><img src="http://img94.imageshack.us/img94/1076/img0288ae.jpg"><br><br><img src="http://img405.imageshack.us/img405/7384/img0289at.jpg"><br><br><img src="http://img856.imageshack.us/img856/7595/img0290a.jpg"><br><br><br><br><img src="http://img828.imageshack.us/img828/9085/img0291an.jpg"><br><img src="http://img12.imageshack.us/img12/4860/img0281asl.jpg"><br><img src="http://img8.imageshack.us/img8/2880/img0282aa.jpg"><br></a>http://img641.imageshack.us/img641/156/img0284aao.jpg<br>http://img94.imageshack.us/img94/1076/img0288ae.jpg<br>http://img405.imageshack.us/img405/7384/img0289at.jpg<br>http://img856.imageshack.us/img856/7595/img0290a.jpg<br>http://img828.imageshack.us/img828/9085/img0291an.jpg<br>http://img12.imageshack.us/img12/4860/img0281asl.jpg<br>http://img8.imageshack.us/img8/2880/img0282aa.jpg<br><img src="http://img571.imageshack.us/img571/8175/img0283am.jpg"><br><br><img src="http://img571.imageshack.us/img571/8175/img0283am.jpg"><br><img src="http://img840.imageshack.us/img840/5562/img0273aar.jpg"><br><img src="http://img692.imageshack.us/img692/1299/img0277al.jpg"><br>c<img src="http://img692.imageshack.us/img692/1299/img0277al.jpg"><br><img src="http://img109.imageshack.us/img109/4066/img0279ab.jpg"><br><img src="http://img833.imageshack.us/img833/1795/img0280ai.jpg"><br>c<img src="http://img833.imageshack.us/img833/1795/img0280ai.jpg"><br><img src="http://img687.imageshack.us/img687/3618/img0270au.jpg"><br><br>and some of sketch for every parts when install<br>tank protector , make it a little higher <br>pillion seat embed with all the lighting system turn signal and brake light<br>lower cowling<br>front fender <br>Whole rear section , undertail , new side parts <br>some small thing like radiator guard . some of the electrical things<br>these are just prototype , not yet molded , so the design can change (production will be in october - november)<br>all my design would be stupidly easy to install (No mod at all)and I will keep the price as low as possible , say , Others wind screen are 1400 - 1800 , I would go for 800 (swap yours) and 1200 for one way sale.<br>I need your comments to improve the designm anything atall ,please just tell me .<br><br>Ps. sorry about my foot in that pic . not intended<br><br>edit picture

Edited by uppalux
Link to comment
Share on other sites

And the large Honda tank bag, one of those things that you wonder how you got by without one once you get used to having it.

Is a great piece of kit, and got to fully test the rain cover for it that's attached to a little pouch on it..... I couldn't have been wetter if I'd jumped into the pool by the time I got home, and the bag, it was bone dry underneath.

Have to say that the durability on my bag isn't exactly as planned. Just over one month and it's just about finished.

I use it most days for light traveling. A bike jacket and computer notebook in it. Always on the tank. Have had it full of shopping 2-3 times, and never overweight. And always on the tank. I noticed the top of the strap had become pulling away about a week ago.

57077783.jpg

And on the top of the bag a rather large hole was growing on a daily basis.13354798.jpg

Spoke to a clothes mender by my condo when walking past about sewing them up but after a minute of checking inside and out she said no. :(

Then this morning when getting off the bike I noticed the other end of the strap:

67882817.jpg

It's never been over loaded weight wise, and is only carried by the straps from my bike to my condo. I know a few others on here have the same bag and ye experienced anything like this? I've a feeling it was just a one off.

:

Link to comment
Share on other sites

Just bought a cbr250r - love it to bits. But can anyone help with a query. I live near Ramintra road, anyone know where (preferably near) I can buy a decent motorcycle lock? Also, any advise on what make of lock would be best/available? Many thanks,

J

Link to comment
Share on other sites

Just bought a cbr250r - love it to bits. But can anyone help with a query. I live near Ramintra road, anyone know where (preferably near) I can buy a decent motorcycle lock? Also, any advise on what make of lock would be best/available? Many thanks,

J

it takes about 20-30 seconds to steal a bike parked in public so a heavy chain fixed to something immovable is the best bet ,even then its only a deterrent so they will hopefuly move onto something easier

theres loads of vids on youtube of bikes being stolen and its scary how fast they can do it ..........

Link to comment
Share on other sites

Just bought a cbr250r - love it to bits. But can anyone help with a query. I live near Ramintra road, anyone know where (preferably near) I can buy a decent motorcycle lock? Also, any advise on what make of lock would be best/available? Many thanks,

J

Pandarider is near you and they sell the Xena alarmed disk locks for 1500 Baht. Go to Laksi roundabout and take the first left down Phahonyothin. The shop is not far down on the other side so you'll have to do a u-turn.

pandarider.com

Link to comment
Share on other sites

Just bought a cbr250r - love it to bits. But can anyone help with a query. I live near Ramintra road, anyone know where (preferably near) I can buy a decent motorcycle lock? Also, any advise on what make of lock would be best/available? Many thanks,

J

Pandarider is near you and they sell the Xena alarmed disk locks for 1500 Baht. Go to Laksi roundabout and take the first left down Phahonyothin. The shop is not far down on the other side so you'll have to do a u-turn.

pandarider.com

I think it is Soi 50

If you are comming from Laksi you will see a Shell petrol station on your right. Take the next U-turn and get over to the left as Panda is only 200 or so meters up the road.

The CBR is light enough for two (strong) people to liftt, so if you are of a nervous disposition, get a cable / chain to anchor it to something.

The Xeon adaptor link is a pain but it works.

Have a look and a think....

Link to comment
Share on other sites

Just bought a cbr250r - love it to bits. But can anyone help with a query. I live near Ramintra road, anyone know where (preferably near) I can buy a decent motorcycle lock? Also, any advise on what make of lock would be best/available? Many thanks,

J

Pandarider is near you and they sell the Xena alarmed disk locks for 1500 Baht. Go to Laksi roundabout and take the first left down Phahonyothin. The shop is not far down on the other side so you'll have to do a u-turn.

pandarider.com

I think it is Soi 50

If you are comming from Laksi you will see a Shell petrol station on your right. Take the next U-turn and get over to the left as Panda is only 200 or so meters up the road.

The CBR is light enough for two (strong) people to liftt, so if you are of a nervous disposition, get a cable / chain to anchor it to something.

The Xeon adaptor link is a pain but it works.

Have a look and a think....

they only have to lift the front wheel if the steering is locked and roll it , nobody would raise an eyebrow if a couple of thai guys in overalls and honda jackets wheeled it away casually

best to always try and park it in a attended car park where you cant get out without the parking ticket but if there isnt that id anchor it down to something thats not movable and hope for the best ......

Link to comment
Share on other sites

Just bought a cbr250r - love it to bits. But can anyone help with a query. I live near Ramintra road, anyone know where (preferably near) I can buy a decent motorcycle lock? Also, any advise on what make of lock would be best/available? Many thanks,

J

Pandarider is near you and they sell the Xena alarmed disk locks for 1500 Baht. Go to Laksi roundabout and take the first left down Phahonyothin. The shop is not far down on the other side so you'll have to do a u-turn.

pandarider.com

I think it is Soi 50

If you are comming from Laksi you will see a Shell petrol station on your right. Take the next U-turn and get over to the left as Panda is only 200 or so meters up the road.

The CBR is light enough for two (strong) people to liftt, so if you are of a nervous disposition, get a cable / chain to anchor it to something.

The Xeon adaptor link is a pain but it works.

Have a look and a think....

they only have to lift the front wheel if the steering is locked and roll it , nobody would raise an eyebrow if a couple of thai guys in overalls and honda jackets wheeled it away casually

best to always try and park it in a attended car park where you cant get out without the parking ticket but if there isnt that id anchor it down to something thats not movable and hope for the best ......

Good point!

Xion also do very small freeze proof disc locks so get TWO to prevent wheeling :-)

Can still be lifted but it's harder to drag 100kg

Not such an issue with heavier bikes.

It's pretty challenging to drag 200+kg off to your lair!

Link to comment
Share on other sites

3 thai guys could pull up alongside it in a mini-van with the rear seats removed (mirrored windows ),slide the door open and shes gone in seconds :rolleyes:

i saw a youtube vid of just 2 guys doing it in USA to a (gsx-r i think it was ) but these were larger gentlemen than your average thai :)

Link to comment
Share on other sites

The indicators (all 4) suddenly stopped working on mine last night (no flashing light on the dash either). This morning they suddenly came back on after about 30 mins of riding, then stopped working again 10 mins later and are yet to start again. Something similar happened when it was a month or two old and it was something to do with water getting into a fuse or something, but it's been perfectly dry here.

Have to say that for a 9 month old bike the amount of small little things going wrong with it is getting a bit tedious. which is a shame as it's so much fun to ride.

Edited by hehehoho
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



  • Topics

  • Latest posts...

    1. 4,291

      Latest developments and discussion of recent events in the Ukraine War

    2. 32

      Iran Poised for 'Strong and Complex' Strike on Israel Amid U.S. Warnings

    3. 39

      Leaving Thailand 2024

    4. 1

      The Subtle Shift from Boyfriend to ‘Useful Assistant’ in Thailand

    5. 20

      Foreigners brawl on Patong Beach sparks criticism of Thai laws

    6. 20

      Foreigners brawl on Patong Beach sparks criticism of Thai laws

    7. 1

      The Subtle Shift from Boyfriend to ‘Useful Assistant’ in Thailand

  • Popular in The Pub


×
×
  • Create New...